Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
• .ENUTV-2 • Driver CD • Remote Control • USB Cable • Quick Guide 1.2 System Requirements • .IBM PC or compatible • .P4 1.6 (for Preview); P4 2.4 or above(Mpeg 4 need 2.8) (for Record) • .Minimum 128 MB memory (256MB is better) • .Minimum 100 MB hard disk space available • VGA and with DirectDraw driver supporting 16 bit color or higher • .One free USB2.0 slot • Microsoft Windows XP/Vista • CD-ROM drive Chapter 2: Getting Started 2.1 Connect USB ENUTV-2 To install the ENUTV-2 into your computer, follow the steps below: 1. Connect the antenna cable to the “TV” connector. 2. Connect the Device to PC USB Hub. 2.2 Device Driver Installation 1. Once you connect ENUTV-2 to the USB port, you can just follow the system’s prompted messages to finish the driver installation. 2. When you insert ENUTV-2, system will show the “Found New Hardware” dialogue box. 3. Insert “Driver & Utilities” CD into CD-ROM(or DVD-ROM), and click “Setup Driver” button to setup the driver. 4. Click “Next” button. 5. Click “Install” button. 6. Click “Next” button. 7. Wait Installation Wizard copying necessary driver files onto your system. 8. Click “Continue Anyway” button. 9. Click “Finish” button. 10. Click “Finish” button again to complete installation. 2.3 Install the DirectX® Microsoft DirectX® allows 3D hardware acceleration support in Windows® 98, 2000, Windows® XP. For software MPEG support in Windows 98, you must first install Microsoft DirectX®, and then an MPEG compliant video player. Follow the installation steps below to install Microsoft DirectX®. 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Click the “DirectX” button. 3. Click “Accept the agreement” radio button then click “Next” 4. Click “Next” to confirm the installation of DirectX 5. Click “Finish” NOTE: The computer will automatically restart. Please close all programs if any and save files if needed before hitting the “Finish” button. 2.4 Install the ENUTV-2 Utility Software. 1. Click “Setup Utility” to begin installing TV application. 2. Click “Next” button to start installing. 3. Please read the License Agreement and click “Next” to begin copying files. 4. Click “Next” or choose setup folder for installation. 5. Then click “Finish” to complete the installation of ENUTV-2. 6. Select the “Yes, I want to restart my computer now” and click the “OK” to restart your computer. Chapter 3: Launch the ENUTV-2 Program 3.1 Running the ENUTV-2 for the first time Click “Start”, move your mouse to “Programs\ENUTV-2\ENUTV-2” then click ENUTV-2 NOTE: When the ENUTV-2 Program is first started, it will prompt you to select your country and language: 1. Select the video signal format in your area (NTSC or PAL) from the “TV Tuner Standard” drop-down menu. 2. Click “Next” 3. This step will give you an option to scan for TV channels. Select which signal source you are connected to in the “TV Scan Type” line then click “Search”. There are two types of scans. 1. One is scan by TV channel table “Cable”, “Antenna” and “Extend” 2. One is scan by frequency that scanslow frequency to high frequency. The “Auto” scan mode is not for the TV table order. 3.2 Watch TV programs or movies from DVD/VCR/Camcorder 1. TV wall display: Show 4x4 TV wall on screen 2. Channel List: This is listing all available TV channel. 3. Channel control: Set channel up or down 4. Volume control: Adjust the Volume or mute. 5. Search TV channel: Click to search available TV channel. 6. Double click to full screen display.. 1.TV wall display 2.Channel List 3.Channel Control 6. Double click to full screen 4.Volume Control 5.Search TV Channel -2 When you do a full screen display, you can use the panel bar to set up your TV box. 1. Fix Panel: To fix the display panel. Show / Hide as mouse drags. 2. Hide Panel: To hide the sub-panel. 3. Snapshot: Same as "Snapshot" button of main panel. 4. TV Wall: To launch TV Wall function, same as "TV Wall" button, 5. Start / Stop Record: Record the current playing audio/video, same as "Start/Stop Record" of main panel. 6. Switch Next Channel: Switch to next channel, same as "Switch Next Channel" button of main panel. 7. Switch Previous Channel: Switch to previous channel, same as "Switch Previous Channel" button of main panel. 8. Volume Adjustment: To adjust the output volume, same as "Volume Adjust" scroll bar of the main panel. 9. Mute: Audio Mute 3.3 Record Video Click “Record” button to start recording video. You can use the control panel or setting table to set the video format. It can be set to the following format. MPEG-1, 2, 4; DVD, VCD, HiDVD… -2 -2 3.4 Snapshot Image Click the “Snapshot” button to capture still image. Click the “Setting” button to setup the image format. ENUTV-2 supports BMP and JPEG image format. Please choose your desired format. 3.5 Playback Video Click the “Playback” button to Play the recording Video. Click “Play List” button to select video file. Choose the video then click “open” button. -2 -2 Exit: To exit...