Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Contrast This setting adjusts the contrast of the MicroTrack II display Press up or down on the [NAV] wheel to adjust this value Higher values result in a darker display Press in on the [NAV] wheel when finished MicroTrack II User Guide Playback EQ This menu provides access to the six EQ curves built into MicroTrack II These curves affect playback only—all recordings are made without EQ To activate an EQ preset, use the [NAV] wheel to select the curve, then press in to activate it The EQ has the following settings: 1 Normal: This defeats the EQ and provides flat playback response 2 Bass Boost: Increases the low frequencies during playback 3 Bass Reduce: Decreases the low frequencies during playback 4 Treble Boost: Increases the high frequencies during playback 5 Treble Reduce: Decreases the high frequencies during playback 6 Bass and Treble Boost: Increases both the low and high frequencies during playback Scrub Audio This is an on/off setting that allows you to hear audio as you rewind and fast-forward through an audio file When set to on, you will be able to hear bits of the file as you seek When off, MicroTrack II will be silent while seeking Rec Time Display This option dictates how MicroTrack II computes the remaining recording time that is shown on the LCD Display in the Record and Record Pause States CF cards and Microdrives with a capacity of more than 512 MB use the FAT 32 file system This file system has an inherent 2GB limit on file size Thus, MicroTrack II may show a shorter record time available, even if there are more than 2GB available on the CF media The Rec Time Display settings are: • Time until 2GB: This setting will compute the remaining recording time available based on a 2GB size (or the currently available space on the CF media if less than 2GB) • Time on Media: This setting will compute the total available recording time remaining based on the free space on the CF media When recording WAV files, MicroTrack II helps circumvent the 2GB file size limitation by automatically creating an additional WAV file once the 2GB limit has been reached and continuing to record to the new file This ensures that you can record for a long period of time and the overall capacity of the media becomes the time limit When recording an MP3 file, the recording will stop when a 2GB file size is reached, and the recorded 2GB MP3 will be saved Record Button This option will set the behavior of the Record Button The settings are: • Record: This setting causes MicroTrack II to enter the Record State when the Record button is pressed • Record/Pause: This setting causes MicroTrack II to enter the Record Pause State when the Record button is pressed This allows the user to set recording levels before starting to record Pressing the Record button a second time, or pushing in on the [NAV] wheel starts the actual recording. Verify Delete This is a simple on/off menu preference that enables or disables the delete confirmation message When this feature is on, you will be asked to confirm a file delete any time you press the [DEL] key This helps prevent accidental erasure of files you wish to keep When this feature is off, files will be deleted as soon as the [DEL] button is pressed MicroTrack II User Guide System Menu Connect to PC This menu option is used to place your MicroTrack II in “host mode,” effectively turning MicroTrack II into a USB Compact Flash card reader This allows quick and easy transfer of audio and firmware files between your computer and MicroTrack II While MicroTrack II is in host mode, it cannot play or record audio files The screen will simply display the “M- Audio” logo and USB icon to indicate it is in host mode > CAUTION: It is suggested that you close the connection from the computer BEFORE disconnecting the MicroTrack II USB cable or exiting host mode on MicroTrack II. If you fail to do this, there is a slight chance that information on the CF card might get corrupted. Refer to the section entitled “Disconnecting MicroTrack II from Your Computer” for instructions how to unmount and disconnect your MicroTrack II from Windows and Macintosh OS X computers. To enter host mode: 1 Connect a USB cable from the computer to MicroTrack II 2 Select “Connect to PC” from the “System” menu The “M-Audio” logo will appear on the screen to indicate that MicroTrack II is in host mode Another method to enter host mode: 1 Turn off MicroTrack II 2 Connect a USB cable from the computer to MicroTrack II MicroTrack II will automatically power up and enter host mode The “M-Audio” logo will appear on the screen to indicate it is in host mode Format Media This menu allows you to format the inserted CF or Microdrive media It is necessary to format your media before you can begin recording Be aware that formatting a medium will erase any data it contains Because of this, formatting can be used as a quick way to delete all files on the CF or Microdrive media 1 When you first enter this menu option, the screen will read “F...
Эта инструкция также подходит к моделям:Видеонаблюдение - MicroTrack II (1.37 mb)
Видеонаблюдение - MicroTrack II (1.37 mb)