Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
If DDNS will not be used, simply select “Disable”. EverfocusDDNS Figure 4-24 EverfocusDDNS DVR Name: Input the desired name for the DVR Register/Update: Click the button to submit and register the name to the Everfocus server. The DDNS name you choose must be unique; that is, it must not already be in use. Please go to the website and check that the name you wish to use is available. PLEASE NOTE: The name of the DVR cannot include a space, or a dot (period) or any special characters particularly ~!@#$%^&*()+<>";:., _ In the DVR’s Network Menu above, go to DDNS. Choose “everfocusddns.com” for the Server and put in your chosen name (verified available and without special characters) for DVR Name/hostname. Press the Select or Submit/Update button to synchronize the DVR with the DDNS server. You should see an indication of “Success” on the screen. If you see “Could Not Find Server” or any other error message 68 instead, double-check your network settings and DDNS name and resubmit the DDNS name until you get “Success”. You should now be able to connect by typing in the host name you created. Example: It is not necessary to append the HTTP port number to the DDNS name. The EverFocus DDNS server not only keeps track of your DVR’s IP address, it keeps track of the ports too! Figure 4-25 Host name: Host name created through the dyndns account. User name: User name of the dyndns account. Password: Password of the dyndns account. Confirm: Re-enter password. Note: For more details on DDNS setup, please see “Chapter 7 -Everfocus DDNS Setup”. 69 4.6.4 Alarm Server Figure 4-26 Network Menu – Alarm Server This menu defines the parameters for communicating with a PC running PowerCon software. Server IP1~3: IP address of client PC with installed PowerCon Software. The network alarm can be transmitted to up to 3 addresses. Protocol: Select the protocol type for alarm transmission: UDP: User Datagram Protocol TCP: Transmission Control Protocol Port: Select the transmission port for network alarm messages Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm). 70 71 4.7 Disk Information 4-27 is a screen shot of the DISK INFORMATION MENU. This menu is used to review the DVR’s hard drive settings and status. No values in this screen can be changed by the operator. Figure 4-27 Disk Menu 4.7.1 Disk Record Time (Start): Shows earliest recorded time on the hard drive. Record Time (End): Shows latest or most current recorded time on the hard drive. Health Status: Displays current status of the selected disk. Disk Temperature: Displays current disk temperature. Disk Size/Total: Shows total disk size. Disk Size/Usage: Shows percentage of used disk space. If DVR is set to automatically overwrite the disk, this option will show “Overwrite mode currently”. 4.8 DISPLAY SETTING Figure 4-28 is a screen shot of the DISPLAY SETTING MENU. This menu will walk you through the Main Monitor On-Screen Display (OSD) and Main Monitor Sequential setup. Figure 4-28 Display Menu – Monitor OSD 4.8.1 Monitor OSD These are the display options for the Main Monitor. Main Monitor Camera Title: Check the box to display camera titles. Date/Time: Check the box to display current date/time. Playback Date/Time: Check the box to display playback date/time. Playback Status: Check the box to display playback status. Event Status: Check the box to display event status. HDD Status: Check the box to display hard drive status. Main Monitor Output: This system supports both VGA and BNC monitor displays at the same time, but only one of them can have optimized display quality. Use this feature to select which output is optimized. 72 4.8.2 Main M/T SEQ Figure 4-29 Display Menu – Main M/T SEQ Step: Sequence order. For reference. Camera: Select which camera appears in the current step. Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99 seconds. Sequence repeats continuously from steps 1 through 20 until interrupted. 73 4.9 SYSTEM SETTING Figure 4-30 is a screen shot of the SYSTEM SETTING MENU. This menu is for setting up general system parameters for the DVR. Figure 4-30 System Menu – Date/Time 4.9.1 Date/Time Date: Set current Date. Time: Set current Time. Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy. Time Format: Change time format between 12H and 24H mode. Time Zone: Set the time zone that the DVR adjusts to when updating from the time server. NTP: Select “Enable” or “Disable” NTP time synchronization. NTP Server: Displays the time server address that the DVR uses for time synchronization. Requires operating network configuration and WAN or LAN access to a compatible NTP server. To find a compatible NTP address, please follow these steps: a) Go to a PC that is connected to the internet. b) Click on “START” -> “RUN” -> type “command” and press “OK”. c) In the DOS Prompt, type “pi...
Эта инструкция также подходит к моделям:Видеонаблюдение - ECOR264-4F1 (3.23 mb)
Видеонаблюдение - ECOR264-8D1 (3.23 mb)
Видеонаблюдение - ECOR264-8F1 (3.23 mb)