Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Whenever you want to watch the VCR picture, press ETV/VIDEO to display the VIDEO indicator in the display window. Audio/video cable (not supplied) LINE-2 OUT LINE IN : Signal flow Getting Getting Started 13 Step 4 Step 4 Tuning your TV to the VCR If you have connected the VCR to your TV using the EURO-AV cable, skip this step. I/u ON/STANDBY PROGRAM +/– RF CHANNEL 1 ON/STANDBY Press I/u ON/STANDBY to turn on the VCR. 2 Press RF CHANNEL on the VCR lightly. The factory-preset RF channel appears in the display window. RF CHANNEL The VCR signal is output through this channel to the TV. 3 Turn on your TV and select a programme position for the VCR picture. This programme position will now be referred to as the video channel. 4 Press RF CHANNEL. RF CHANNEL The TV system appears in the display window. Getting Started PROGRAM Press PROGRAM +/– (repeatedly) to select the appropriate TV system for your area. Select “G” for the B/G TV system, or “K” for the D/K TV system. Tune the TV to the same channel as that shown in the display window so that the picture on the right appears clearly on the TV screen. Refer to your TV manual for tuning instructions. If you select the wrong TV system in step 5, the picture on the right may not appear. Select the appropriate TV system and tune the TV again. If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below. SONY VIDEO CASSETTE RECORDER Press RF CHANNEL. You have now tuned your TV to the VCR. Whenever you want to RF CHANNEL play a tape, set the TV to the video channel. To check to see if the TV tuning is correct Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct. To obtain a clear picture from the VCR If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears. Note • If you set the wrong TV system, you may have no sound or sound may be distorted. Getting Getting Started 15 Step 4 Step 4 Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the TV channels guided by the sequence indicated on the TV screen. AUTO SET UP AUTO Hold down AUTO SET UP on the VCR for more than three seconds. SET UP The VCR automatically turns on. The VCR starts searching for all of the receivable channels and presets them according to the TV system you selected in “Tuning your TV to the VCR.” When no more receivable channels can be found, presetting stops and “SET UP” disappears from the display window. To cancel the Auto Set Up function Press AUTO SET UP. Tip • The factory preset language for the on-screen display is English. If you want to change the language to Russian, see page 19. Note • Do not cancel the Auto Set Up function during presetting. If you do, repeat the step above. Getting Started Step 6 Step 6 Setting the clock You must set the time and date on the VCR to use the timer recording features properly. Setting the clock manually Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. >/./?// OK MENU MENU Press MENU, then press >/.to highlight SETTINGS and press OK. OK PLAY SETTINGS RETURN TUNER CLOCK LANGUAGE SELECT : SET : OK EXIT : MENU OK PLAY Press >/.to highlight CLOCK, then press OK. MENUEXIT : CLOCK .1 1 . 1999 FRI 0 : 00 CONFIRM : SET : OK SELECT : OK PLAY Press >/.to set the date. CONFIRM : SET : OK MENUEXIT : CLOCK 8 . 1 . 1999 TUE 0 : 00 SELECT : 2 continued Getting Started Getting Step 6 : Setting the clock (continued) 4 Press /to highlight the month and set the month pressing >/.. OK PLAY CONFIRM : SET : OK CLOCK 8 . 9 . 1999 TUE 0 : 00 SELECT : 2 EXIT : MENU 5 Set the year, hour, and minutes in sequence, pressing /to highlight the item to be set, and press >/.to select the digits. OK PLAY The day of the week is set automatically. CONFIRM : SET : OK CLOCK 8 . 9 . 1999 TUE 8 : 00 SELECT : 2 1 EXIT : MENU 6 OK PLAY Press OK to start the clock. Tips • To change the digits during setting, press ? to return to the item to be changed, and select the digits pressing >/.. • If you want to return to the previous menu, highlight RETURN and press OK. Note • The menu disappears automatically if you don’t proceed for more than a few minutes. Getting Started Selecting a language You can change the on-screen display language from the one you selected with the Auto Set Up function. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. >/. OK MENU MENU Press MENU, then press >/.to highlight SETTINGS and press OK. OK PLAY SETTINGS RETURN TUNER CLOCK LANGUAGE SELECT : SET : EXIT : OK MENU OK PLAY Press >/.to highlight LANGU...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE50EE (600.33 kb)