Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press the Timer Button to confirm the minute. 4. Press the Skip/Search Buttons to adjust the hour for the “Timer Off” time. Press the Timer Button to confirm the hour. 5. Press the Skip/Search Buttons to adjust the minute for the “Timer Off” time. Press the Timer Button to confirm the minute. Setting the Sleep Timer 1. Press the Sleep Button consecutively to adjust and set the sleep timer. The sleep timer can be set from 10 to 90 minutes in 10 minute increments. Docking an iPod 1. Turn the dial in the Docking Station to the desired iPod model. The dial will rise from the unit to create the necessary depth for the selected iPod model. When inserting an iPod nano (first or second generation), slide the Dock connection on the unit so that it matches the opening on the iPod nano (first or second generation). Playing an iPod 1. Connect an iPod to the Docking Station. (See “Docking an iPod”) 2. Press the Power Button to turn the unit on. 3. Press the iPod Button to switch the unit to iPod mode. 4. Press the Play/Pause Button to begin playing the docked iPod. 5. Press the Volume Buttons to increase or decrease the volume of the unit. 6. Press the Skip/Search Buttons to skip tracks. Press and hold the Skip/Search Buttons to search through individual tracks. 7. Press the Chapter, Album, or Playlists Buttons on the remote to navigate through the chapters, albums, or playlists on a docked iPod. 8. Press the Directional Buttons and Select Button on the remote to navigate the iPod’s menu and make selections. 9. Press the Repeat/M-Dn Button consecutively to repeat a single track or entire album. 10. Press the Shuffle Button to play songs from a CD or an iPod in a random order. Playing a CD 1. Press the Power Button to turn the unit on. 2. Press the Function Button and switch the unit to CD mode. 3. Insert a CD or CD-R/RW disc into the Slot Load CD Drive. 4. Press the Play/Pause/Mem-Up Button to play or pause the loaded CD. 5. Press the Skip/Search Buttons to skip tracks. Press and hold the Skip/Search Buttons to search through individual tracks. 6. Press the Repeat/M-Dn Button consecutively to repeat a single track or entire album. 7. Press the Shuffle Button to play songs from a CD in a random order. 8. Press the Eject Button to eject the loaded CD from the unit. Programming a CD 1. Press the Power Button to turn the unit on. 2. Press the Function Button and switch the unit to CD mode. 3. Insert a CD or CD-R/RW disc into the Slot Load CD Drive. 4. Press the Mem/Clk Adj Button to activate the program function. 5. Press the Skip/Search Buttons to select a CD track, and press the Mem/Clk Adj Button to confirm the selection. The programmed tracks will play in the order they are selected. 6. Repeat step 5 until the desired tracks are programmed. Up to 20 tracks can be programmed. 7. Press the Play/Pause/Mem-Up Button to play or pause the programmed CD tracks. Tuning the AM/FM Radio 1. Press the Power Button to turn the unit on. 2. Press the Function Button to switch to unit to radio mode. 3. Press the Stop/Band Button to switch between AM and FM radio. Extend and adjust the telescopic FM antenna to improve FM reception. An AM antenna is built-in to the unit. Adjust the position of the unit to improve AM reception. 4. Press the Skip/Search Buttons to tune the radio. Saving a Radio Station to the Unit’s Memory 1. Press the Power Button to turn the unit on. 2. Press the Function Button to switch to unit to radio mode. 3. Press the Stop/Band Button to switch between AM and FM radio. 4. Press the Skip/Search Buttons to tune the radio. 5. Press and hold the Mem/Clk Adj Button to begin saving the current radio station. 6. Press the Skip/Search Buttons to select a memory slot for the current radio station. Choose from “P01” to “P10”. 7. Press the Mem/Clk Adj Button to confirm the selected memory slot. 8. Press the Play/Pause/Mem-Up Button and Repeat/M-Dn Button to cycle through the saved radio stations. Using the Auxiliary Input 1. Plug one end of a 3.5 mm mini-phono cable (not included) or a 3.5 mm mini- phono to RCA cable (not included) into the Aux Input on the unit. 2. Plug the other end of the cable into the audio output/headphone output on an Mp3 Player or Other Audio Source. 3. Press the Power Button to turn the unit on. 4. Press the Function Button to switch the unit to aux mode. 5. Audio played from the Mp3 Player or Other Audio Source will now be heard on the unit. If connecting to the headphone output of an audio source, the source’s volume controls may need to be adjusted for optimal sound. Location of Controls 1 2 9 10 3 11 4 14 8 12 5 6 13 7 Control Definitions 1 Handle Use the handle to carry and move the unit. 2 Function Button Press the Function Button to switch between radio mode, CD mode, and Aux mode. 3 Stop/Band Button Press the Stop Button to stop a CD or iPod during play. • Press the Stop/Band Button in radio mode to switch between AM and FM. 4 iPod Button Press the iPod Button to put the unit in iPod mode. 5 ...