Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To record from a decoder or other source, leave the connected equipment switched on. To return to the previous step To return to the previous step, press the PROGRAM + and – buttons on the VCR at the same time during any of the Dial Timer settings. To stop recording To stop the VCR while recording, press x STOP. To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 43). • Display tape information on the TV screen (page 45). • Check the timer settings (page 66). • Watch another TV programme (page 46). Recording TV programmes using the Dial Timer (SLV-SE810D/E and SX810D only) To set the clock 1 Turn DIAL TIMER so that “CLOCK” appears in the display window. 2 Press DIAL TIMER. “DAY” appears in the display window. 3 Turn DIAL TIMER to set the day. 4 Press DIAL TIMER. “MONTH” appears in the display window. 5 Turn and press DIAL TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window again. 6 Turn and press DIAL TIMER to set the hour and minute. 7 When you have finished setting the time, press DIAL TIMER to start the clock. Tips • To cancel a Dial Timer setting, press x (stop) on the VCR while you are making the setting. • The programme is recorded in the current tape speed mode. To change the tape speed, press SP/LP before you complete the setting in step 9. • When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1 menu (page 82). • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” (page 66). Notes • If eight programmes have already been set using the ShowView system or the TIMER menu, “FULL” appears in the display window for about five seconds. • The indicator flashes in the display window when you complete the setting in step 9 with no tape inserted. • If you set the clock using the Auto Clock Set function and AUTO ADJUST is set to ON, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set correctly. • The station name may not appear if the VCR does not receive station name information signals. Basic Operations continued Recording TV programmes using the Dial Timer (SLV-SE810D/E and SX810D only) About the Demonstration Mode The Dial Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the FULL notice which appears if eight programmes have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X (pause) on the VCR while turning the DIAL TIMER. “DEMO” appears in the display window for a few seconds. To cancel the Demonstration Mode Turn the power off and unplug the mains lead. Although the Demonstration Mode is cancelled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Dial Timer or any other timer method after reconnecting the mains lead (see page 66). Recording TV programmes using the Dial Timer (SLV-SE810D/E and SX810D only) Recording TV programmes using the ShowView system (not available on SLV-SE610A/E) The ShowView system is the feature that simplifies programming the VCR to make timer recordings. Just enter the ShowView number listed in the TV programme guide. The date, times, and programme position of that programme are set automatically. You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Turnonyour TVand setittothe videochannel. • Set TIMER OPTIONS to SHOWVIEW or VARIABLE in the OPTIONS-2 menu (see page 82). • Refer to “Index to parts and controls” for button locations. Basic Operations TIMER OK PLAY Press TIMER. • When you set TIMER OPTIONS to VARIABLE: The TIMER METHOD menu appears on the TV screen. Press M/m to select SHOWVIEW, then press OK. • When you set TIMER OPTIONS to SHOWVIEW: The SHOWVIEW menu appears on the TV screen. TIMER METHOD STANDARD SHOWVIEW SELECT : SET : EXIT : OK MENU MENUEXIT : SHOWVIEW SET : – 0–9 SHOWVIEW NO. ––––––– – FRI28 . 9 c...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE610A (1.21 mb)
Видеомагнитофоны/видеоплееры - SLV-SE610E (1.21 mb)
Видеомагнитофоны/видеоплееры - SLV-SE710D (1.21 mb)
Видеомагнитофоны/видеоплееры - SLV-SE710E (1.21 mb)