Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
However, an index signal will be marked if you change the programme position during recording pause. • When you press . INDEX SEARCH, if there is nothing recorded before the selected index signal, playback may not start exactly at the index signal. Additional Operations Searching using the index function Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then turns off), distortion may occur if the recording is in poor condition. In this case, manually adjust the tracking. During playback, press PROGRAM +/– on the VCR to display the tracking meter. The TRACKING Tracking meter distortionshoulddisappear as youpress one of the two buttons (the indicator lights up). To resume automatic tracking adjustments, eject the tape and re-insert it. About the Reality Regenerator (Reality Regenerator) function The Reality Regenerator function automatically restores the picture to its original quality during playback. To use the Reality Regenerator (RR) function 1 Press MENU, then select OPTIONS and press OK. 2 Press M/m to highlight OPTIONS-2 then press OK. 3 Press M/m to highlight RR, then press OK. OPTIONS - 2 TIMER OPTIONS DECODER / LINE3 POWER SAVE VARIABLE DECODER OFF TV DIRECT REC HIGH OFF NORMALRR RETURN SELECT : CONFIRM : EXIT : OK MENU 4 Press M/m to set RR to NORMAL or HIGH, then press OK. The RR indicator lights up in the display window. 5 Press MENU to return to the original screen. To turn it off, select OFF in step 3. The RR indicator turns off in the display window. Adjusting the picture About the Optimum Picture Control (OPC) function The Optimum Picture Control (OPC) function automatically improves recording and playback quality by adjusting the VCR to the condition of the video heads and tape. To maintain better picture quality, we recommend that you set OPC to ON in the OPTIONS-1 menu (the OPC indicator lights up in the display window). For details, see page 81. SET : SELECT : OK MENUEXIT : OPTIONS - 1 ONOPC OFF OFFAUDIO MIX OFF NICAMHIFI AUDIO E180 EDIT AUTO LONG PLAY TAPE LENGTH RETURN OPC playback The OPC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with OPC. OPC recording Whenever you insert a tape and start recording for the first time, the VCR adjusts to the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment is retained until the tape is ejected. To deactivate the OPC function Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display window turns off. Tip • To set tracking to the centre position, press the PROGRAM + and – buttons on the VCR at the same time. Notes • You can adjust the tracking for an NTSC-recorded tape but the tracking meter won’tbe displayed. • With the Auto Long Play function on, the OPC function will work only in SP mode. If the tape speed automatically switches from SP to LP, the OPC function turns off. If, however, the entire programme is recorded in LP mode, the OPC function will work. • There is a delay of about ten seconds before the VCR actually starts recording while the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator flashes slowly) and press z REC to have the VCR analyse the tape (the OPC indicator flashes rapidly) and return to recording pause. After the OPC indicator stops flashing, press X PAUSE to start recording immediately. If you want to start recording quickly without using the OPC function, first set the VCR to recording pause (the OPC indicator flashes slowly) and press X PAUSE again to start recording. Additional Operations Adjusting the picture Reducing the VCR’s power consumption You can turn off the indicators in the display window when the VCR is off (standby mode) to reduce the VCR’s power consumption. 1 Press MENU, then select OPTIONS and press OK. 2 Press M/m to highlight OPTIONS-2, then press OK. 3 Press M/m to select POWER SAVE, then press OK. OPTIONS - 2 TIMER OPTIONS DECODER / LINE3 POWER SAVE DECODER FULL TV DIRECT REC PARTIAL OFFRR RETURN SELECT : CONFIRM : EXIT : MENU OK 4 Press M/m to highlight the option, then press OK. For SLV-SE610E, SE710D/E, SX710D/E, SX717D/E, SE810D/E, SX810D • FULL to reduce the power consumption to a minimum • PARTIAL to reduce the power consumption For SLV-SE610A • ON to reduce the power consumption to a minimum 5 Press MENU to return to the original screen. To turn on the indicators in the display window Set POWER SAVE to OFF in step 4. Notes • When the VCR stands by for recording, the indicators in the display window remain lit even when POWER SAVE is set to FULL, PARTIAL, or ON. • If POWER SAVE is set to FULL*, you cannot watch or record programmes from your PAY-TV/Canal Plus decoder, satellite, or digital tuner during standby mode (page 82). * not available on SLV-SE610A Reducing the VCR’s power consumption Changing menu options 1 Press MENU, then s...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE610A (1.21 mb)
Видеомагнитофоны/видеоплееры - SLV-SE610E (1.21 mb)
Видеомагнитофоны/видеоплееры - SLV-SE710D (1.21 mb)
Видеомагнитофоны/видеоплееры - SLV-SE710E (1.21 mb)