Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
When you first install the unit, or when you move it from a cold to a warm location, wait for about four hours before operating the unit. Caution Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or program owner. Compatible colour/TV systems Color system Recording Playback PAL PAL MESECAM MESECAM NTSC 4.43 NTSC 4.43 NTSC 3.58 NTSC 3.58 Recording of video sources based on other colour systems cannot be guaranteed. • To play back tapes recorded with the PAL and MESECAM colour systems, you need a TV or colour monitor compatible with these systems. • Tapes recorded with the NTSC colour system can be played back on this unit using a TV or a colour monitor for the PAL colour system. Before using the unit for the first time, set up the unit. 1 Connect the mains lead to the mains. Turn on your TV and the unit. Tune the TV to channel 32 (the initial RF channel for this unit). Refer to your TV manual for TV tuning instructions. 2 If the picture does not appear clearly on the TV, press MENU, then press v/V/ b/B to highlight INSTALLATION and press OK. Then press v/V to highlight VCR OUTPUT CH and press B. Select the RF channel by pressing the b/B buttons. Then, tune the TV to the new RF channel so that a clear picture appears. 3 Press MENU, then press v/V/b/B to highlight LANGUAGE SET and press OK. Press b/B to highlight the desired language, ENGLISH or ARABIC, then press OK. Notes • The sound is muted during playback at various speeds and pause. • You can eject a tape even when the power is off. When you press Z EJECT, the unit turns on automatically. After ejecting the tape, the unit turns off again. • The counter resets to “0:00:00” whenever a tape is inserted. • The counter stops counting when it comes to a portion with no recording. • If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This is due to the difference between the counting cycles of the two color systems. • If antenna hookup is used, the following will occur while playing a PAL or MESECAM- recorded tape: – the picture is black and white. – the sound is distorted (noisy sound). • Streaks or snow cannot be eliminated completely in the various playback operations. • On screen symbols may shake while playing or searching at various speeds. Operations Playing/searching at various speeds M FF H PLAY A EJECT 3 Press H PLAY. m REW When the tape reaches the end, it will rewind automatically. Playback options To Do this z REC X PAUSE Stop play Press x STOP. x STOP Pause play Press X PAUSE. Resume play after Press X PAUSE or H pause PLAY. Fast-forward the Press M FF during stop. tape Rewind the tape Press m REW during stop. DISPLAY View the picture During fast-forward, hold during fast-M FF down. forward or rewind During rewind, hold m X PAUSE REW down. H PLAY Play at high speed • During playback, briefly press M FF or m REW. M FF • During playback, hold down M FF or m x STOP REW. When you release the button, m REW normal playback resumes. Eject the tape Press A EJECT on the1 Turn on your TV and set it to the video unit. channel. Resume normal Press H PLAY. playback 2 Insert a tape. The unit turns on, and starts playing automatically if you insert a tape with its safety tab removed. Using Playback Dial on the VCR Tip With Playback Dial, you can operate the following playback options. • Adjust the picture using the TRACKING +/– buttons on the VCR if: -Streaks appear while playing in slow motion. Playback Dial -Bands appear at the top or bottom while pausing. -The picture shakes while pausing. To set tracking to the centre position, press both buttons (+/–) at the same time. Notes • The sound is muted during these operations. To Do this • In the LP mode, noise may appear or there may Resume play after pause Fast-forward the tape Rewind the tape Press H PLAY. Quickly turn and release Playback Dial to the right (M FF) during stop. Quickly turn and release Playback Dial to the left be no colour. • If the playback mode mark does not appear on the TV screen, press DISPLAY. • The picture may show noise when playing at high speed in reverse. • Do not turn Playback Dial forcibly. It may damage Playback Dial. (m REW) during stop. View the picture during fast- forward or rewind During fast-forward, turn and hold Playback Dial to the right (M FF). During rewind, turn and hold Playback Dial to the left (m REW). Play at high speed • During playback, quickly turn and release Playback Dial to the right (M FF) or left (m REW). The tape continues to play at high speed. • During playback, turn and hold Playback Dial to the right (M FF) or left (m REW). When you release Playback Dial, normal playback resumes. Step 3 : Hookups Connect the unit to your TV using the audio/vide...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-GA59SG (143.09 kb)