Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
22 3.2. Windows® 2000 Driver Installation ............................................................. 27 4. Troubleshooting Tips ........................................................................ 28 5. Appendix .......................................................................................... 29 5.1. How to Reflash the BIOS ........................................................................... 29 5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 29 5.1.2. Reflash BIOS in Windows mode ................................................................................ 29 5.2. Resolutions and Color Depth Table (In Windows® XP) ............................... 30 GV-N62128DP Graphics Accelerator - 2 1. Introduction 1.1. Features • Powered by NVIDIA® GeForce™ 6200 Graphics Processing Unit (GPU) • Supports AGP 8X • Integrated with 128MB DDR memory • Supports DirectX 9.0c • Support AV / S-Video and HDTV output • Supports TV-Out and D-Sub connectors • Supports DVI-I connector 1.2. Minimum System Requirement • IBM® or 100% PC compatible with Pentium® III 650MHz or AMD Athlon 650MHz class processor or higher • One available AGP3.0 compliant slot or better • Operating Systems Windows® 2000 / Windows® XP • 64MB system memory • 50MB of available disk space for full installation • CD-ROM or DVD-ROM drive English -3 - Introduction EnglishEnglish 2. Hardware Installation 2.1. Board Layout TV-Out DVI-I Connector VGA Monitor Connector (15-pin) Analog LCD Monitor NTSC / PAL TV Projector Y S-Video Output Analog LCD Monitor Pr Pb/AV Output HDTV OR Digital LCD Monitor TV-out VGA Monitor Connector (15-pin) DVI-I Connector VGA Output Analog Monitor VGA Output DVI-I to D-Sub Connector DVI Output GV-N62128DP Graphics Accelerator - 4 Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system. The card contains sensitive electric components, which can be easily damaged by static electricity, so the card should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the antistatic mat. Inspect the card carton for obvious damage. Shipping and handling may cause damage to your card. Be sure there are no shipping and handling damages on the card before proceeding. DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON THE CARD. In order to ensure your graphics card working correctly, please use official Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem on the graphics card. English -5 -Hardware Installation EnglishEnglish 2.2. Hardware Installation Installing Your Graphics Card. Now that you have prepared your computer, you are ready to install your graphics accelerator card. To install your graphics accelerator card: 1. Power off the computer and monitor, then disconnect the display cable from the back of your computer. 2. Remove the computer cover. If necessary, consult your computer's manual for help in removing the cover. 3. Remove any existing graphics card from your computer. Or, if your computer has any on-board graphics capability, you may need to disable it on the motherboard. For more information, see your computer documentation. GV-N62128DP Graphics Accelerator - 6 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 5. Replace the screw to fasten the card in place, and replace the computer cover. After installation, please connect the power cable to your graphics card, or the system will not boot. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. To TV or VCR To VGA Monitor To Flat Panel Display You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. English -7 - Hardware Installation EnglishEnglish 3. Software Installation In this manual, we assume that your CD-ROM Drive letter to be Drive D: The installation of Windows® 2000 / Windows® XP drivers is very simple. When you insert the driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver. (Please follow the...