Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
. When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder. . When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder's instruction manual for operating procedure. B Set recorder’s input mode Press number key “0” and/or PR +/– to select “F-1” for the AUDIO/VIDEO input connectors, or “S-2” for the AUDIO/SVIDEO input connectors, depending on the connectors being used. C Select “EDIT” for picture control set mode Follow the “Picture Control” section on page 15, then select “EDIT.” D Start camcorder Engage its Play mode. E Start recorder Engage its Record mode. Edit to or from Another Video Recorder Editing IMPORTANT . To edit, both the player and the recorder must be of the same colour system. Select the appropriate colour system (16). . PAL, SECAM and NTSC camcorders can be used as a player for editing. a If the camcorder has no S-VIDEO output connector... b If the camcorder has an S-VIDEO output connector... Audio/Video Cable (not provided) AUDIO input VIDEO input AUDIO OUT VIDEO OUT Player Camcorder Recorder Audio Cable (not provided) AUDIO input S-VIDEO (S-2) input AUDIO OUT S-VIDEO OUT Player Camcorder Recorder S-Video Cable (provided) (MONO) (MONO) Recorder Your recorder TV Receiver Player Another recorder AV Cable (not provided) RF Cable (provided) VIDEO CHANNEL TV Receiver Your recorder Recorder Player Another recorder AV Cable (not provided) RF Cable (provided) VIDEO CHANNEL You can use your video recorder as the source player or the recording deck. A Make connections System Connections Connect the player's AUDIO/VIDEO OUT connector to the recorder's AUDIO/VIDEO IN connector. . Use the L connector for monaural connection. B Set recording deck’s input mode Set to AUX. With this video recorder, press number key “0” and/or PR +/– to select depending on the connector being used — "L-1" for the rear panel VIDEO/AUDIO input connectors, or “F-1” for the front panel VIDEO/AUDIO input connectors. C Select “EDIT” for picture control set mode Follow the “Picture Control” section on page 15, then select “EDIT.” D Start source player Engage its Play mode. E Set recording deck Engage its Record mode. . NOTES: To edit, both the player and the recorder must be of the same colour system. Select the appropriate colour system (. 16). . When you use this recorder as the player for editing, be sure to set “O.S.D.” to “OFF” before starting (. 16). . All necessary cables can be obtained from your dealer. . NTSC tapes being played back in the "NTSC]PAL" mode (. 16) cannot be dubbed to another recorder. . When you dub an NTSC tape using your recorder as the playback deck, select "NTSC 3.58" (or "NTSC 4.43") for "NTSC" setting (. 16). . When you select “EDIT” to dub tapes, be sure to select “AUTO” (or “NORM” when the B.E.S.T. function is set to “OFF”) after you finish dubbing the tapes (. 15). . If you are using another recorder with S-Video and Audio input/ output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S VIDEO OUT and AUDIO IN/OUT connectors. When Using Your Video Recorder As The Source Player ... ... connect its rear panel S VIDEO OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors. When Using Your Video Recorder As The Recording Deck ... ... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to “S-1”. Connecting/Using a Stereo System These instructions enable you to connect your video recorder to your Hi-Fi stereo system (if you have one) and listen to the soundtrack through the stereo. FM Tuner (MONO) IIII I I I I I I I I I IIIIII I I I I I IIIIII I I I I I I I I IIIII CD Player Stereo Amplifier AUX IN or TAPE MONITOR Audio Cable (not provided) Mains outlet Television Speaker Speaker AUDIO OUT Rear View Make Connections Connect the AUDIO OUT L and R connectors on your video recorder to the AUX IN or TAPE MONITOR terminals on your stereo system's receiver or amplifier. . NOTES: When connecting your recorder's audio output connectors to a stereo amplifier, make sure you connect L and R correctly. . If stereo or bilingual TV broadcasts are receivable in your area, this recorder can record them independently of the TV set and play them back through the connected stereo system. . When listening to sound through the connected stereo system, turn the TV's volume down completely. . CAUTIONS This recorder has a dynamic range of more than 80 dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier. A sudden surge in the input level to the speakers may damage them. . Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the...