Войти:
Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации Orion, модель 5196

Производитель: Orion
Размер: 100.36 kb
Название файла: 29385_05-10.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


C 05/10 The 0.85x Reducer-Correctors were designed specifically for use with selected Orion “ED” refractors. They are intended for photographic use only with digital single-lens reflex (DSLR) cameras. #5195 0.85x Reducer-Corrector for ED80 (#9895, not the EON 80 #9927). Shortens the focal length from 600mm to 510mm (f/7.5 to f/6.38). #5196 0.85x Reducer-Corrector for ED100 (#9975). Shortens the focal length from 900mm to 765mm (f/9.0 to f/7.65). #5198 0.85x Reducer-Corrector for ED120 (#9976 ED120, not #9925 EON 120ED). Shortens the focal length from 900mm to 765mm (f/9.0 to f/7.65). installing the reducer-corrector 1. Extend the focuser drawtube out, as shown in Fig. 1. 2. Rotate the lock ring inward on the focuser drawtube until it stops (Fig. 2). Do not tighten. 3. Screw the Reducer-Corrector onto the drawtube until it stops, and tighten it slightly. There should now be a gap between the edge of the Reducer- Corrector and the lock ring (Fig. 3). 4. Now rotate the lock ring outward (toward the Reducer-Corrector) until it is tight against the Reducer-Corrector (Fig. 4). Then attach the appropriate Wide T-ring (sold separately) for your DSLR camera to the T-threads on the Reducer-Corrector. NOTE: The Orion 0.85x Reducer-Corrector requires the use of a “wide” T-ring, which utilizes 48mm threads. The Reducer-Corrector is not compatible with standard T-rings. Orion carries Wide T-rings for Canon and Nikon cameras. 5. Now attach your DSLR camera to the Wide T-ring (Fig. 5). 6. To adjust the camera angle to frame the object you want to photograph on the camera chip, loosen the Reducer-Corrector by turning it counterclockwise (from camera side) until the camera is in the position you want. Then tighten the lock ring against the Reducer-Corrector to secure it in place. You’re now ready to take pictures! care and cleaning When not in use, keep both thread-on lens caps on the Reducer-Corrector to protect the optics, and store it in a dry place. If dust builds up on the lenses, simply blow it off with a blower bulb or lightly brush it off with a soft camel-hair brush. Avoid touching optical surfaces with your fingers, as skin oil may mar the optical multi-coatings. To remove fingerprints or smudges from the lens, use photographic-type lens cleaning fluid and lint-free optical lens cleaning tissue. Don’t use household cleaners or eyeglass-type cleaning cloth or wipes, as they often contain undesirable additives like silicone, which don’t work well on precision optics. Place a few drops of fluid on the tissue (not directly on the lens), wipe gently in a circular Gap Figure 3. Gap between the Reducer- Corrector and lock ring. Figure 5. DSLR camera attached to the Reducer-Corrector. Lock ring Figure 1. Lock ring on focuser drawtube. Figure 2. Lock ring positioned as far inward as it will go. Wide T-ring Figure 4. Tighten lock ring against Reducer-Corrector. Then thread on the Wide T-ring for your camera model. motion, then remove the fluid with a dry tissue or...

Эта инструкция также подходит к моделям:
Оптические приборы - 5195 (100.36 kb)
Оптические приборы - 5198 (100.36 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории