Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Sony, модель DCR-DVD203E

Производитель: Sony
Размер: 4.57 mb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


113) Shoe cover (1) (p.81) (Except for DCR-DVD403E/DVD803E) Attached to the camcorder. Lens cap (1) (p.20) (DCR-DVD92E/DVD602E) Attached to the camcorder. Rechargeable battery pack (1) (p. 18) NP-FP50: Except for DCR-DVD403E/ DVD803E NP-FP70: DCR-DVD403E/DVD803E CD-ROM “PicturePackage Ver.1.8” (1) (p.82) (Except for DCR-DVD92E/DVD202E/ DVD602E) Operating Guide (This manual) (1) AV connecting cable (1) (p.42, 78) USB cable (1) (p.82) (Except for DCR-DVD92E/DVD202E/ DVD602E) Wireless Remote Commander (1) (p.41) (Except for DCR-DVD92E/DVD602E) A button-type lithium battery is already installed. 16 Step 2: Charging the battery pack You can charge the battery after attaching the “InfoLITHIUM” battery pack (P series) (p.107) to your camcorder. DC IN jack cover 1 Slide the battery pack in the direction of the arrow until it clicks. 2 Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting). 3 Connect the AC Adaptor to the DC IN jack on your camcorder. Open the DC IN jack cover to connect the AC Adaptor. DC IN jack cover 4 Connect the AC Adaptor to the wall socket using the mains lead. The CHG (charge) lamp lights up and charging starts. O o O o CHG 5 The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack on your camcorder. Disconnect the AC Adaptor holding both your camcorder and the DC plug. 17 Getting Started Step 2: Charging the battery pack (continued) To remove a battery pack Slide the BATT release button in the direction of the arrow while pressing down the projection in the center of the BATT release button (0), slide the battery pack towards the back of your camcorder, then remove the battery pack (@). Projection For DCR-DVD92E/DVD602E/DVD653E When storing the battery pack Use up the battery pack completely if you do not intend to use it for a long time (p.107). To use an outside power source Make the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case. Charging time (full charge) Approximate time (min.) required when you fully charge a fully discharged battery pack. Battery pack Charging time NP-FP50* 130 NP-FP70** 160 NP-FP90 220 * Supplied with the models except for DCR- DVD403E/DVD803E. **Supplied with DCR-DVD403E/DVD803E. Recording time Approximate time (min.) available when you use a fully charged battery pack. Continuous Typical Battery pack recording recording time time NP-FP50 (supplied) 80 85 90 35 40 40 170 80 NP-FP70 185 90 190 90 300 145 NP-FP90 335 165 345 170 For DCR-DVD202E/DVD203E/DVD703E Continuous Typical Battery pack recording recording time time NP-FP50 (supplied) 75 85 90 35 40 40 NP-FP70 160 180 190 70 85 90 NP-FP90 290 320 345 140 155 170 For DCR-DVD403E/DVD803E Battery pack Continuous recording time Typical recording time NP-FP50 55 60 60 25 25 25 NP-FP70 (supplied) 120 125 130 55 60 60 NP-FP90 215 230 235 105 110 115 If you record under the following conditions: Top: When the LCD backlight turns on. Middle: When the LCD backlight turns off. Bottom: Recording time when recording with the viewfinder while the LCD screen is closed. 18 Playback time Approximate time (min.) available when you use a fully charged battery pack. For DCR-DVD92E/DVD602E/DVD653E Battery pack LCD screen opened* LCD screen closed NP-FP50 (supplied) 105 125 NP-FP70 225 265 NP-FP90 400 475 For DCR-DVD202E/DVD203E/DVD703E Battery pack LCD screen opened* LCD screen closed NP-FP50 (supplied) 90 110 NP-FP70 190 235 NP-FP90 345 415 For DCR-DVD403E/DVD803E Battery pack LCD screen opened* LCD screen closed NP-FP50 90 105 NP-FP70 (supplied) 190 225 NP-FP90 345 400 * When the LCD backlight turns on. On the battery pack • Before changing the battery pack, slide the POWER switch up to OFF (CHG). • The CHG (charge) lamp flashes during charging, or BATTERY INFO (p.37) will not be correctly displayed under the following conditions. - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is fully discharged. (For BATTERY INFO only.) • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC jack of your camcorder, even when the mains lead is disconnected from the wall socket. • We recommend that you use an NP-FP70 or NP-FP90 battery pack when a video light (optional) is attached. On the charging/recording/playback time • Times measured with the camcorder at 25 °C (77°F). (10-30°C (50-86°F) is recommended.) • Available recording and playback time will be shorter when you use your camcorder in low temperatures. • The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Use the nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor...

Эта инструкция также подходит к моделям:
Видеокамеры - DCR-DVD202E (4.57 mb)
Видеокамеры - DCR-DVD403E (4.57 mb)
Видеокамеры - DCR-DVD602E (4.57 mb)
Видеокамеры - DCR-DVD653E (4.57 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории