Оценок - 2, средний балл: 4.5 ( )

Производитель: Sony Размер: 4.57 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  DCR-DVD92E

Use an AC adaptor. • The disc has already been finalized. If you are using a DVD-RW (VIDEO mode)/DVD+RW, follow the required procedure to record additional material on the disc (p.50). You cannot edit or record additional material on a disc using other devices. • You may not be able to edit a disc recorded on your camcorder using another device. The disc title cannot be changed. • You cannot record a disc title on a finalized DVD-R. • The disc has already been finalized. If you are using a DVD-RW (VIDEO mode)/DVD+RW, follow the required procedure to record additional material on the disc (p.50). • The disc title may not be changed on your camcorder if the disc title has been made by another device. A photomovie cannot be created. • There are no still images. • There may be a lot of still images on a disc and the remaining disc capacity is low. Delete unneccesary images from the disc (p.72). The melody or beep sounds for 5 seconds. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for about 1 hour (p.109). • Some problems have occurred in your camcorder. Remove the disc and insert it again, then operate your camcorder again. 97 Troubleshooting Troubleshooting (continued) Connecting to a computer (Except for DCR-DVD92E/DVD202E/DVD602E) The computer does not recognize your camcorder. • Install the Picture Package software (p.82). • Disconnect the cable from the computer and camcorder, then connect it again firmly. • Disconnect USB device other than the keyboard, the mouse, and the camcorder from the computer. • Disconnect the cable from the computer and camcorder, restart the computer, then connect them again correctly. • Confirm the USB driver is correctly installed with the following procedures. For Windows XP 1 Click [Start], then [Control Panel]. 2 Click [Performance and Maintenance], then [System]. The [System Properties] window appears. 3 Click [Hardware] tab. 4 Click [Device Manager]. The [Device Manager] window appears. 5 Make sure that [SONY DDX-C1000 USB Device] appears in [DVD/CD-ROM drives], [Generic volume] in [Storage volumes], and [USB Mass Storage Device] in [Universal Serial Bus controllers] respectively. When all the devices appear, the USB driver is installed correctly. If any of these devices are not shown, install USB driver. © Place the supplied CD-ROM in the disc drive on your computer. © Double-click [My Computer]. © Right-click [PICTUREPACKAGE] icon (Disc drive)*, then click [Open]. *Drive names (such as (E:)) may vary depending on the computer. © Double-click [Driver] —— [Setup.exe]. 98 For Windows 2000 1 Click [Start], [Settings], then [Control Panel]. 2 Click [System]. The [System Properties] window appears. 3 Click [Hardware] tab. 4 Click [Device Manager]. The [Device Manager] window appears. 5 Make sure that [SONY DDX-C1000 USB Device] appears in [DVD/CD-ROM drives], [Generic volume] in [Storage volumes], and [USB Mass Storage Device] in [Universal Serial Bus controllers] respectively. When all the devices appear, the USB driver is installed correctly. If any of these devices are not shown, install USB driver. © Place the supplied CD-ROM in the disc drive on your computer. © Double-click [My Computer]. ® Right-click [PICTUREPACKAGE] icon (Disc drive)*, then click [Open]. *Drive names (such as (E:)) may vary depending on the computer. © Double-click [Driver] —— [Setup.exe]. An error message appears when you place the supplied CD-ROM in your computer. • Set the computer display as follows: - Windows: 800 x 600 dots or more, High Color (16 bits, 65 000 colors) or more You cannot use the supplied CD-ROM on a Macintosh computer. • The supplied CD-ROM is not compatible with a Macintosh computer. 99 Troubleshooting Troubleshooting (continued) [Cannot start Easy Handycam with USB connected] or [Cannot cancel Easy Handycam with USB connected] appears on the screen of your camcorder. • You cannot start or cancel the Easy Handycam operation while the USB cable is connected. Disconnect the USB cable from your camcorder first. You cannot transfer image data from your camcorder to a computer. • Set [USB SPEED] to [FULL SPEED] in setup item. The images or sound of your camcorder cannot be played back correctly. • When you connect your camcorder to a computer not compatible with Hi-Speed USB (USB 2.0), it may not be able to be played back correctly. However, it does not effect to the images or sounds transferred to your computer. • When you set the [USB SPEED] to [FULL SPEED], it may not be able to be played back correctly. However, it does not effect to the images or sounds transferred to your computer. • Depending on the computer you use, the played back image or sound may stops temporarily, but this does not effect the images or sound transferred to your computer. You...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: