Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
With DLNA, you can transfer and play videos and photos under wireless connection between home networking devices such as TV or PC and your camcorder. What is DLNA (Digital Living Network Alliance)? Connect between camcorder and AP wirelessly while connect TV and AP in cables. You can play on the connected device only those videos and photos that were recorded by the camcorder. The network connection range between the camcorder and the selected device may differ depending on the AP. • • • AP device • If the camcorder is turned off abnormally (ex: removing the battery) while you are playing a video or photo on the select device, the device considers that it is still connected to the camcorder. • It may take a longer time to transfer videos or photos to the device, depending on the network connection and the file size. • The sharing function is not enabled if no video or photo is recorded by the camcorder. • You can share photos and videos up to 1000 files. The more files you share, the slower the camcorder operates. We recommend storing the files below 1000. • When playing HD quality videos on TV, use 802.11n AP and set the AP to 802.11n. When the Data Encryption is set to WEP or TKIP, 802.11g is the default setting so you cannot play HD quality videos on TV. • This function is applied only to DLNA-certified DMP (Digital Media Player). • This function may not operate properly on a Samsung HDTV that has no AllShare™ mark on it. • Video stuttering may occur, depending on the TV type and network status. • When a video stuttering occurs, change to a low video quality (SF, F or SD quality) for recording. • In case of a video stuttering while playing a video file through wireless connection, use HDMI or AV cable. • While playing videos on a Samsung HDTV supporting AllShare™, if the screen stuttering repeatedly happens for over 3 seconds, consult with the call centre. using the wireless network (HMX-S15/S16 only) SAVING THE VIDEOS/PHOTOS TO THE PC You can save the videos and photos in the camcorder to the PC via the network. PRECHECK! Select the record ( / ) mode by pressing the MODE button. ..page 27 1. Touch the Network ( ) .. “Backup to PC.” • The camcorder will be connected to the network via the last connected AP. • If no AP is ever connected, the camcorder will scan for APs available. ..page 112 2. Touch the desired device. • To reload the device list, tap Refresh ( ) tab. 3. Touch the HD ( ), SD ( SD ) or Photo ( ) tab. • The thumbnail of videos or photos will appear. • The videos and photos in the thumbnail will be displayed only in 4x3. • Use / to move to the previous or next page. 4. Touch the video or photo to save to the PC. • The selected video or photo will be marked with ( ) on the screen. Each time you touch the file, it will be selected and deselected alternatively. 5. Touch the ( OK ) tab. • To cancel saving the files, touch the Cancel. 6. To end “Backup to PC,” touch the Exit ( ) tab. .......................................................................................................................................................................................................................................... OK...... SD • You can play only those videos and photos that were recorded by the camcorder. • The network connection range between the camcorder and the selected device may differ depending on the AP. • This function is available only after you have installed Samsung AllShare PC Software on your PC. Samsung AllShare PC Software is a program that lets you transfer files wirelessly from your camcorder to your PC. For more details, visit the website • The following folders and files are created in the internal memory and memory card to support AllShare PC Software. These files and folders are necessary for your computer to detect the camcorder through AllShare PC Software. If the names for folders and files are modified or deleted, the camcorder is not detected. -system/Contents.xml, system/Device.xml • For the AllShare PC Software environment configuration, see page 146. • If the camcorder is turned off abnormally (ex: removing the battery) while you are playing a video or photo on the select device, the device considers that it is still connected to the camcorder. • It may take a longer time to transfer videos or photos to the device, depending on the network connection 118 • and the file size. This function is not enabled if no video or photo is recorded by the camcorder. Signal flow Mini HDMI Cable Using a mini HDMI cable 1. Connect the camcorder to a TV with a Mini HDMI cable. • Turn on the camcorder, then connect a Mini HDMI cable. If not, the camcorder may fail to recognise the connected TV. 2. Set the TV’s input selector to enable the TV to recognise the connected camcorder. • Refer to the TV’s instruction manual to see how to select the TV input. 3. Select the playback mode on your camcorder and start to play back videos. page 94 • Only a C to A type Mini HDMI ca...
Эта инструкция также подходит к моделям:Видеокамеры - HMX-S15BP (16.49 mb)
Видеокамеры - HMX-S10BP (16.49 mb)