Оценок - 3, средний балл: 3 ( )

Производитель: Alcatel Carrier Internetworking Solutions Размер: 2.24 mb Название файла: Язык инструкции:

debug 802.1q {slot/port | aggregate_id} Syntax Definitions slot The slot number to configure 802.1Q tagging. port The port number to configure 802.1Q tagging. aggregate_id The aggregate link number to configure 802.1Q tagging. Defaults N/A Platforms Supported OmniSwitch 6624, 6648, 7700, 7800, 8800 Usage Guidelines Retrieves debugging messages for the tagged port selected. Examples -> debug 802.1q 5Aggregate Status = aggregate up -> debug 802.1q 3/1Slot Status = slot up Port Status = port up GENERAL INFO ESM: USER PORT 1-12 = CORONADO PORT 0-11 GENERAL INFO ESM: USER PORT 13-24 = CORONADO PORT 16-27 GENERAL INFO GSM: USER PORT 1 = CORONADO PORT 12 GENERAL INFO GSM: USER PORT 2 = CORONADO PORT 28 HARDWARE INFO for slot = 3 and port = 1: At reg_addr = 660012c, Ingress tag-untag:= 1: At reg_addr = 6a00010, Eg tag-untag: = 1: At reg_addr = 6601000,for protocol = 0,ing default vlan: = 1At reg_addr = 6601080,for protocol = 1,ing default vlan: = 1At reg_addr = 6601100,for protocol = 2,ing default vlan: = 1At reg_addr = 6601180,for protocol = 3,ing default vlan: = 1At reg_addr = 6601200,for protocol = 4,ing default vlan: = 1At reg_addr = 6601280,for protocol = 5,ing default vlan: = 1At reg_addr = 6601300,for protocol = 6,ing default vlan: = 1At reg_addr = 6a70000, egress default vlan: = 1At reg_addr = 6600118, protocol cam on/off: = 18 : At reg_addr = 660011c, trusted/untrusted: = fff0fe6At reg_addr = 6600130, secure/unsecure: = 18At reg_addr = 6608020, for vlan = 8,spanning tree vector: = 1At reg_addr = 6a00014, Eg force tag internal: = 0: page -6 OmniSwitch Troubleshooting Guide September 2005 output definitions Aggregate/Slot Status Whether the slot or aggregate link is actively running. Port Status Whether the port is actively running. General Info Provides general information on the modules in the chassis, including module type, number of ports, and ASIC. Hardware Info Lists the various debug messages for the selected slot and port. Release History Release 5.1; command was introduced. Related Commands N/A MIB Objects N/A OmniSwitch Troubleshooting Guide September 2005 page -7 ip dvmrp debug-level Defines the level of debugging for DVMRP protocol on the switch. ip dvmrp debug-level level Syntax Definitions level Specifies the DVMRP debug level (0–255). Higher debug-levels will include all messages that correspond to a lower value. For example, a debug level of 2 will display all messages for level 1 and level 2. As a rule of thumb, higher levels will display more detailed messages; lower levels will display more basic messages. Defaults parameter default level 1 Platforms Supported OmniSwitch 7700, 7800, 8800 Usage Guidelines When the debug level is set to 0, DVMRP debug logging is turned off. Examples -> ip dvmrp debug-level 2 Release History Release 5.1; command was introduced. Related Commands ip dvmrp debug-type Enables or disables DVMRP debugging for a specified message type, or for all message types. show ip dvmrp debug Displays the current level of debugging for DVMRP protocol on the switch, as well as the current DVMRP debugging status for all messages types. MIB Objects ALADVMRPDEBUGCONFIG alaDvmrpDebugLevel page -8 OmniSwitch Troubleshooting Guide September 2005 ip dvmrp debug-type Enables or disables DVMRP debugging for a specified message type, or for all message types. Note. Debugging for a specified message type will only be enabled if its debug level is a value greater than zero (i.e., 1–255). For information on specifying the debug level, refer to the ip dvmrp debug-level command. ip dvmrp debug-type message_type no ip dvmrp debug-type message_type Syntax Definitions message_type Enables or disables DVMRP debugging for the specified item. Select from the list below. You may enter multiple message types in any order. For example, ip dvmrp debug-type time flash init. supported message types descriptions all Enables or disables DVMRP debugging for all items listed below. The syntax all can be used to easily turn debugging for all message types on or off. error Enables or disables debugging for DVMRP Error messages. flash Enables or disables debugging for DVMRP Flash processing. graft Enables or disables debugging for DVMRP Graft processing. igmp Enables or disables debugging for DVMRP Internet Group Management Protocol (IGMP) packet processing. ipmrm Enables or disables debugging for DVMRP IP Multicast Routing Manager (IPMRM) interaction. init Enables or disables debugging related to DVMRP initialization code. mip Enables or disables debugging for MIP (Management Internal Protocol) processing. Includes CLI and SNMP. misc Enables or disables miscellaneous debugging of DVMRP. nbr Enables or disables debugging for DVMRP Neighbor processing. probes Enables or disables debugging for DVMRP Probe processing. prunes Enables or disables debugging for DVMRP Prune processing. routes Enables or disables debugging for DVMRP Route processing. time Enables or disables debugging for DVMRP Timer processing. tm Enab...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: