Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Change the battery as soon as possible. After 3 seconds, the camcorder turns off with the battery indicator blinking. Above figures are based on a fully charged battery at normal temperature. Low ambient temperature may affect the use time. About the battery About the battery Maintaining the battery Recording/Playback time: Approximate time available when you have fully charged the battery. The times are only for reference. Figures shown above are measured under Samsung’s test environment. Your times may differ depending on your usage and conditions. We recommend using the AC power adaptor when using the Time Lapse REC function. The battery should be recharged in an environment that is between 32°F (0°C) and 104°F (40°C). Exposure to temperatures below 32°F (0°C) reduces the battery’s usage time and may cause it to stop working. If this happens, place the battery in your pocket or other warm, protected place for a short time, then re-insert it. Do not put the battery near any heat source (i.e. fire or a heater). Do not disassemble, apply pressure to, or heat the battery. Do not allow battery terminals to be short-circuited. This may cause leakage, generate heat, or cause a fire. The recording time is affected by temperature and environmental conditions. We recommend using only the battery type that came with your camcorder. This battery type is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries must be dealt with as chemical waste. Make sure that the battery is fully charged before starting to record. To preserve battery power, keep your camcorder turned off when you are not operating it. Even when the power is switched off, the battery will still discharge if it is left in the camcorder. We recommend that you remove the battery from the camcorder when not using it. If the battery is not used for a long time, fully charge the battery and then, using your camcorder, drain the charge completely once every 2 months to keep the battery functioning properly. To store the battery, remove it from your camcorder and put it in a cool, dry place. • you are planning to record on the camcorder. The recording and playback time will be shorter when you use your camcorder in low temperatures. On the battery • The charging (CHG) indicator blinks during charging, or battery Info will not be correctly displayed under the following conditions: -The battery is not inserted correctly. -The battery is damaged. -The battery is worn-out. (For the battery information only) Using an AC power source We recommend that you use the AC power adaptor to power the camcorder from a household AC outlet when you set functions, play back, or edit images, or use it indoors. Make the same connections as you do when charging the battery. page 16 On the AC power adaptor Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC p...
Эта инструкция также подходит к моделям:Видеокамеры - HMX-U20SP (2.82 mb)
Видеокамеры - HMX-U20RP (2.82 mb)
Видеокамеры - HMX-U20BP (2.82 mb)