Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Canon, модель PowerShot S80

Производитель: Canon
Размер: 6.88 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


4). Troubleshooting 9 121 List of Messages List of Messages List of Messages List of Messages The following messages may appear on the LCD monitor (or viewfinder) during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... Image is being recorded to, or read from, memory card. Playback mode is starting. Resetting all the camera and menu settings to default. No memory card You attempted to shoot or play back images without an memory card installed. Card locked! SD card is write-protected. (p. 104) Cannot record You attempted to shoot an image without a memory card installed. Memory card error! Memory card has experienced an anomaly. Memory card full Memory card is full of images or sounds and no more can be recorded or saved. Also, no more image settings (such as slide show and print settings) or sound memos can be recorded. Naming error! The image could not be created because there is an image with the same name as the directory that the camera is attempting to create, the highest possible file number has already been reached. In the Set up menu, please set [File Numbering] to [Auto Reset]. After you save all the images or sounds you wish to retain onto a computer, format the memory card (p. 23). Please note that formatting will erase all the existing images and other data. Change the battery pack. Battery charge is insufficient to operate the camera. Replace it at once with a charged one or recharge the battery. No image. No images recorded on memory card. 122 Image too large. Image too large. You attempted to play back an image larger than 4992 x 3328 pixels or with a large data size. Incompatible JPEG format. You attempted to play back an incompatible JPEG image. Corrupted Data. You attempted to play back an image with corrupted data. RAW You attempted to play back a RAW image. Unidentified Image You attempted to play back an image that was recorded in a special data type (proprietary data type used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera. Cannot magnify! You attempted to magnify an image recorded in a different camera or data type, an image edited with a computer, or a movie. Cannot rotate You attempted to rotate an image recorded in a different camera or data type, an image edited with a computer, or a movie. Incompatible WAVE format. A sound memo cannot be added to this image since the data type of the existing sound memo is incorrect. Cannot register this image! You attempted to add a start-up image or a movie that was created with another camera. Protected! You attempted to erase or edit a protected image, movie or sound file. Too many marks. Too many images have been marked with print settings or transfer settings or slide show settings. Cannot process any more. List of 10 Cannot complete! Could not save the print or transfer or slide show settings. 123 Unselectable image. Unselectable image. You attempted to set the print settings for a non- JPEG image. Cannot edit Slide show settings file is corrupted. Exx (xx: number) Camera malfunction. Turn the power off and then back on, then shoot or play back. A problem exists if the error code reappears. Note the number and contact your Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in playback mode. 125 11 AppendixBattery Handling Battery Status Indications The following icons or messages indicate the battery status on the LCD monitor. ..Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with a soft cotton swab before charging or using the battery. ..Do not shake or place the battery charger upside down once the camera battery is in it, as this may cause the battery to fall, damaging it. ..Although the battery pack's maximum operating range is 0 to 40 °C (32 to 104 °F), the optimal range is 10 to 30 °C (50 to 86 °F). At cold temperatures, such as those experienced when skiing, performance will temporarily decline, reducing the usable time before recharging. Under these conditions, revive the battery by warming it in a pocket immediately before use. However, ensure that there are no metallic items in the pocket that could cause a short circuit, such as a key ring, etc. Appendix 125 11 AppendixBattery Handling Battery Status Indications The following icons or messages indicate the battery status on the LCD monitor. ..Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with a soft cotton swab before charging or using the battery. ..Do not shake or place the battery charger upside down once the camera battery is in it, as this may cause the battery to fall, damaging it. ..Although the battery pack's maximum operating range is 0 to 40 °C (32 to 104 °F), the optimal rang...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории