Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Press the button to broaden or the button to narrow the focusing distance from the center. • Settings can be made by turning the multi control dial. • You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 3 Press the FUNC./SET button and shoot the image with the manual focus (p. 64). • The Focus-BKT mode is not available when shooting with the flash on. Only one image at the manual focus position will be taken. • Three images are shot continuously regardless of the continuous shooting setting (p. 40). Switching between Built-in Flash Adjustment Settings Mode Dial Advanced Shooting Functions 4 The built-in flash fires with automatic flash adjustments (except in the mode), but it is possible to set it so that it fires without any adjustments. 1 Select [Flash Adjust] from the [ (Rec.)] menu. See Selecting Menus and Settings (Basic Guide: p. 16). 2 Use the or button to select [Auto] or [Manual] and press the MENU button. Settings can be made by turning the multi control dial. *1 When [Flash Adjust] is set to [Manual], flash output settings can be made. *2 Only [Flash output] can be set. *1 *1 *2 Setting the Flash Adjustment/Flash Output Mode Dial Flash Exposure Compensation • When [Flash Adjust] is set to [Auto], settings can be adjusted in 1/3-stop increments in the range of -2 EV to +2 EV. • You can enjoy flash photography with exposure adjustments with the combined use of the camera's exposure compensation function. Flash Output • In mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps, up to FULL, when shooting. 77 1 Select (Flash or Flash Output) from the FUNC. menu. The available settings are displayed. e.g. [Flash Adjust] set to[Auto] e.g. [Flash Adjust] set to[Manual] 2 Use the or button to adjust the compensation or flash intensity. • Settings can be made by turning the multi control dial. • You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. • The flash fires with automatic adjustments when [Flash Adjust] is set to [Auto] in the Rec. menu. Automatic adjustment sets the flash intensity. When shooting in mode, or with [Flash Adjust] set to [Manual], the flash fires with the manually set adjustments. For manual flash, you set flash intensity in advance. • When [Flash Adjust] is set to [Auto], the flash fires twice. A pre-flash will fire and will be followed by the main flash. The pre-flash is used by the camera to obtain the subject's exposure data so that the main flash can be set to the optimal intensity for the shot. However, the pre-flash does not fire when shooting with FE Lock enabled (p. 67). Switching the Timing at which the Flash Fires Mode Dial The flash fires right after the shutter opens, regardless of the shutter 1st-curtain speed.Usually, the 1st-curtain is used when shooting. The flash fires right before the shutter closes. Compared with the 1st-curtain, 2nd-curtain the flash fires later and this allows you to shoot images in which, for example, a car's lights seem to trail off behind. Image shot with the 1st-Image shot with the 2ndcurtain setting curtain setting 1 Select [Flash Sync] from the [ (Rec.)] menu. See Selecting Menus and Settings (Basic Guide: p. 16). 2 Use the or button to select [1st-curtain] or [2ndcurtain]. Settings can be made by turning the multi control dial. Advanced Shooting Functions 4 79 Shooting Images at Set Intervals (Intervalometer) Mode Dial You can shoot images at a set interval. This function can be used for fixed-point observation of plants and blooming flowers. The shooting interval time can be set from 1 to 60 minutes and 2 to 100 images can be shot. Since the camera may shoot continuously for an extended period of time, the use of the AC Adapter Kit ACK-DC20 (sold separately) is recommended (p. 128). 1 Select [Intervalometer] from the [ (Rec.)] menu and press the FUNC./SET button. See Selecting Menus and Settings (Basic Guide: p. 16). 2 Use the or button to select an interval time. • If you press the or button continuously, the interval time changes in units of 5 minutes at a time. • Settings can be made by turning the multi control dial. 3 Press the button and select the number of shots using the or button. • If you press the or button continuously, the number of shots changes in units of 5 shots at a time. • Settings can be made by turning the multi control dial. • The maximum number of shots* is determined by the available space on the memory card. * The maximum number of shots may be reduced according to the images already shot. 4 Press the FUNC./SET button. The camera exits the menu screen and Int. appears at the lower right of the LCD monitor. 5 Press the shutter button. • The first image is shot and the interval shooting session starts. • Once the set number of shots is t...