Оценок - 3, средний балл: 4.7 ( )

Производитель: Canon Размер: 6.66 mb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Фотоаппараты - Macro Twin Lite MT-24EX (5.9 mb)

Фотоаппараты - Macro Twin Lite MT-24EX (13.02 mb)

Видеокамеры - Macro Twin Lite MT-24EX (5.44 mb)

Видеокамеры - Macro Twin Lite MT-24EX (3.61 mb)

..In terms of aperture stops, the flash ratio range is equivalent to 3:1 - 1:1 - 1:3. ..If the picture is taken while is not displayed, flash tubes/heads A and B will fire at the same output. ..Flash ratio control is not possible with the following cameras. You can fire both flash tubes/heads at the same output or fire only one of the flash tubes/heads. EOS ELAN ll/ELAN ll E/50/50E, EOS REBEL G/500N, EOS IX, EOS IX Lite/IX7, EOS 3000/88, EOS REBEL 2000/300, EOS REBEL XS N/ REBEL G II/3000N/66 (5.6:1)(2.8:1)(1.4:1)(1:1.4)(1:2.8)(1:5.6) Modeling Flash If the camera has a depth-of-field preview button, pressing it will fire the flash continuously for 1 sec. This is called the modeling flash. It enables you to see the shadow effects on the subject and the lighting balance. The modeling flash also works with a wireless, multi-Speedlite system. 7FE Lock FE (flash exposure) lock locks the correct flash exposure reading for any part of the scene. With displayed on the LCD panel, press the camera’s <7> button. If the camera does not have a <7> button, press the

button. 1 Focus the subject. 2 Press the <7> button. (3) ..Place the subject at the center of the viewfinder and press the <7> button. • The MR-14EX/MT-24EX will fire a preflash and the required flash output for the subject is retained in memory. • The FEL display will be shown in the viewfinder for 0.5 sec. ..Each time you press the <7> button, a preflash is fired to update the FE lock reading. ..If the subject is too far away and underexposure will result, the icon will blink in the viewfinder. Move closer to the subject and try the FE lock again. ..If is not displayed on the LCD panel, FE lock cannot be set. ..If the subject is too small, FE lock might not be very effective. fFlash Exposure Compensation In the same way as normal exposure compensation, you can set exposure compensation for flash. The flash exposure compensation amount can be set up to ±3 stops in 1/3-stop increments. 1 Select . ..Press the button to display . • and the flash exposure compensation amount will blink. 2 Set the flash exposure compensation amount. ..Press the or button to set the flash exposure compensation amount. ..To cancel the flash exposure compensation amount, set it to “0”. 3 Press the button. • The flash exposure compensation amount will be set. ..If the flash exposure compensation amount has been set by both the MR-14EX/MT-24EX and camera, the MR-14EX/MT-24EX’s flash exposure compensation amount will override the camera’s. ..If the camera’s exposure setting increment is 1/2 stop, the flash exposure compensation will be set in 1/2-stop increments. gFEB The camera brackets the flash exposure automatically up to ±3 stops in 1/3-stop increments for three successive shots. This is called FEB (Flash Exposure Bracketing). 1 Select . ..Press the button to display . • and the bracketing amount will blink. 2 Set the flash exposure bracketing amount. ..Press the or button to set the bracketing amount. 3 Press the button. • FEB will be set. ..For FEB, set the camera’s drive mode to single shooting. Be sure the flash is ready before shooting. ..FEB cannot be used together with flash exposure compensation set with the camera. ..After the three shots are taken, FEB will be cancelled automatically. ..FEB can be used together with FE lock or flash exposure compensation set with the MR-14EX/MT-24EX. ..If the camera’s exposure setting increment is 1/2 stop, the FEB will be set in 1/2-stop increments. cHigh-speed sync cHigh-speed sync With high-speed sync (FP flash), the flash can synchronize with all shutter speeds. Select . ..Press the and buttons simultaneously to display . ..In the viewfinder, check that the icon is lit. ..If the shutter speed is slower than the maximum flash sync speed, will not be displayed in the viewfinder. ..To return to normal flash, press the and buttons simultaneously to turn off . ..With high-speed sync, the faster the shutter speed, the shorter the flash range will become. rSecond-curtain sync With a slow shutter speed, you can create a light trail following the subject. The flash fires right before the shutter closes. Select . ..Press the and buttons simultaneously to display . ..The camera’s “buLb” mode works well with second-curtain sync. ..To return to normal flash, press the and buttons simultaneously to turn off . ..With E-TTL II/E-TTL, two flashes will be fired even at slow shutter speeds. The first flash is the preflash. qManual Exposure You can set the flash output manually from full output at 1/1 to 1/64 output in full-stop increments. The flash can be fired in one of three ways: 1. A and B fired at the same output, 2. A and B fired at a different output, 3. Only A or B is fired. You should first take a test shot to check the exposure. Firing A and B at the Same Flash Output 1 Select . ..Press the button to displa...

Видеокамеры - Macro Ring Lite MR-14EX (6.66 mb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: