Оценок - 2, средний балл: 5 ( )

Производитель: Canon Размер: 5.9 mb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Фотоаппараты - Macro Twin Lite MT-24EX (13.02 mb)

Видеокамеры - Macro Twin Lite MT-24EX (6.66 mb)

Видеокамеры - Macro Twin Lite MT-24EX (5.44 mb)

Видеокамеры - Macro Twin Lite MT-24EX (3.61 mb)

Only A or B is fired. You should first take a test shot to check the exposure. Firing A and B at the Same Flash Output 1 Select . ..Press the button to display . 2 Set the flash output. ..Press the button. • The flash output blinks. ..Press the or button to set the flash output. • Each time you press the button, the flash output will increase/decrease by 1 stop. ..Press the button. • The flash output is displayed. Firing A and B at a Different Flash Output For step 2 above, follow the procedure below to set a different flash output for A and B. 1 Press the button to display . 2 Select the flash tube/head. ..Press the button to select <1>, and the button to select <2>. 3 Set the flash output. ..Press the or button to set the flash output. ..Pressing the button to set the flash output to “--” will set only the other flash tube/head to fire. • The setting after 1/64 is “--”. The flash tube/head whose flash output has been set to “--” will not fire. CSetting Custom Functions Custom Functions enable you to customize MR-14EX/MT-24EX features to suit your picture-taking preferences. 1 Display the icon. ..Hold down the button for 2 sec. or more. 2 Select the Custom Function No. ..Press the button, and the Custom Function number and setting number will blink. Press the button to select the Custom Function number. 3 Set the setting number. ..Press the or button to select “0” or “1”, then press the button. • The blinking will stop and the setting will take effect. • Pressing the button or button will return the camera to shooting ready. Custom Function Settings C.Fn Function No. Setting Description 1 Automatic cancellation of FEB 0 Enabled 1 Disabled 2 FEB sequence 0 Standard exposure .. Decreased exposure .. Increased exposure 1 Decreased exposure .. Standard exposure .. Increased exposure 3 Flash metering mode 0 E-TTL II/E-TTL autoflash 1 TTL autoflash 4 Test firing button 0 E-TTL II/E-TTL autoflash: Full output Manual flash: Fires at set output 1 Uniform modeling flash 5 Wireless control 0 Slave C only 1 Slaves A, B, and C 6 Modeling Flash 0 Enabled 1 Disabled 7 Flash recycling with external power source 0 Recycle with both the MR-14EX/MT24EX and external power source 1 Recycle with the external power source only 8 Flash ratio increments 0 1/2 stop 1 Full stop 9 Focusing lamp on/off 0 With focusing lamp button 1 Double-click shutter button * C.Fn-8 and C.Fn-9 apply to the MT-24EX only. C.Fn-4: If 1 is set and both flash tubes/heads are selected to fire with autoflash, the modeling flash will be fired by both A and B at the same output. With manual flash, the modeling flash will be fired according to the flash ratio that was set. C.Fn-5: If 1 is set, any slave units whose slave ID has been set to A or B will fire in the same group as flash tube/head A or B set as the master unit. C.Fn-6: If 1 is set and you press the camera’s depth-of-field preview button, you can check the depth of field. The modeling flash cannot be fired. C.Fn-7:If an external power source is used, the flash recycling is powered concurrently by the internal batteries and external power source. In this case, when the internal batteries become exhausted, shooting might not be possible. If 1 is set, the flash recycling will be powered only by the external power source. The internal batteries will thereby last longer. Note that even when 1 is set, the internal batteries must still be installed to power the flash control. C.Fn-9:If 1 is set, you can press the shutter button halfway and press it twice to turn on/off the focusing lamp. This is convenient when both hands are occupied. ..C.Fn-3-1 is mainly for EOS-1 series film cameras. Do not use C.Fn-3-1 with EOS DIGITAL cameras or with the EOS REBEL T2/300X. If C.Fn-3- 1 is set for such cameras, the flash control will not work properly. The flash might not fire or it might fire only at full output. ..With Type-A cameras, if C.Fn-3-1 is set, wireless autoflash shooting will not be possible. ..If C.Fn-5-1 is set, single flash tube/head firing will not be possible. ..If C.Fn-9-1 is set, take care when pressing the shutter button. For example, if you keep pressing the shutter button halfway at short intervals to autofocus, you might inadvertently turn on/off the focusing lamp. This can also occur with the AE lock button and depth-of-field preview button if you press twice one of them or press one button after another at short intervals. With Type-B cameras, even if C.Fn-3-0 is set, E-TTL II/E-TTL autoflash will not work. Wireless Multiple FlashPhotography With one or more EX-series Speedlites having a slave function, you can create a wireless, multi-Speedlite flash system. It is as easy to use as normal E-TTL II autoflash. Wireless Multiple Flash Photography Wireless Multiple Flash Basics As shown below, a wireless multiple macro flash system basically consists of a master unit (flash tubes/heads A and B) and slave un...

Эта инструкция также подходит к моделям:
Фотоаппараты - Macro Ring Lite MR-14EX (5.9 mb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: