Оценок - 5, средний балл: 4.4
(
)
)
|
Фото и характеристики Canon VIXIA HF M40 |
Фрагмент инструкции
142 • External Connections Converting Scenes into Standard Definition from a Story by Rating 1 Open the gallery and bring the desired story to the front. [b] 8[ Gallery] 8 Desired story • Check that you have selected the f tab (built-in memory) or 4 tab (memory card X). 2 Select the rating of the stories you want to convert. [Story Details] 8 [Play by Rating] 8 Desired rating 8[f] 3Press Zand continue the conversion to standard definition from step 5 in the previous procedure (0140). NOTES • When converting scenes from a story: -All the scenes are merged into one converted SD movie. -If the converted SD movie is too large, it will be split into smaller 10minute long movies. -The maximum total playback time of the scenes to be converted is 2 hours and 30 minutes. Converting Only Part of a Scene or Story 1 Play back the scene or story that you want to partially convert. Check that you have selected a scene recorded in the built-in memory or on memory card X. 2 Pause the playback where you want the converted SD movie to begin. 3Press Zand continue the conversion to standard definition from step 5 in the previous procedure (0140). The video from the playback pause until the end of the scene/story (or up to a maximum of 10 minutes, in case of longer scenes/stories) will be converted to standard definition. External Connections .. 143 Uploading your Videos Wirelessly If you are using an Eye-Fi card, you can automatically upload the converted SD movies to your favorite video sharing Web site. You will need to have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance. Refer to the instruction manual of the Eye-Fi card. Please read the IMPORTANT section before using an Eye-Fi card. 1 Insert your Eye-Fi card into memory card slot Y and make sure there is sufficient available space on the memory card. 2 Convert the desired movies (0140). • When the conversion is completed, touch [End Without Connecting]. • If you are within the range of a configured network, Web upload will start automatically. • The status of the wireless communication is shown by the Eye-Fi icon as follows: -g(grayed out) Communication not established -g(white, flashing) Connecting; g(white, continuously on) Wireless upload on standby -g(animated) Wireless upload in progress -i[Eye-Fi Communication] is set to [B Off] -hWireless upload stopped by the camcorder (0170) -oError reading from the Eye-Fi card (0168) IMPORTANT Using an Eye-Fi Card • This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer. • Do not use Eye-Fi cards on airplanes and in other places where wireless communication is forbidden. Remove the Eye-Fi card from the camcorder beforehand. 144 • External Connections NOTES • Depending on the amount of data to be uploaded and the network’s wireless connection conditions, it can take some time to upload video files. If the wireless connection is too weak, the wireless upload may fail and the video files will be registered as incomplete uploads. • About power saving: -Wireless communication drains the power of the battery pack faster than usual. We recommend powering the camcorder using the compact power adapter. -While files are being uploaded wirelessly, the camcorder’s automatic power off function will be disabled. • Wirelessly uploading files is not possible when the Eye-Fi card is in memory card slot X (the Eye-Fi icon will not appear on the screen). Be sure to insert the Eye-Fi card into memory card slot Y. • While using an Eye-Fi Card, the ACCESS indicator may flash from time to time. • Wireless communication is available only in playback mode. Any wireless transfer in progress will be stopped if you set the camcorder to recording mode. • Wireless communication is not available when the optional WM-V1 Wireless Microphone is attached to the camcorder. Any wireless transfer in progress will be stopped the moment you attach the WM-V1 to the camcorder. • You can turn off the wireless communication with the 68 [Eye-Fi Communication]* setting. • If the LOCK switch on the Eye-Fi card is set to prevent writing, you will not be able to turn the wireless communication on/off and the status icon will change to o. To use wireless communication make sure the switch on the Eye-Fi card is not in the LOCK position. * This menu option will appear only when using an Eye-Fi card. External Connections .. 145 Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For deta...