Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Also, it adjusts recording conditions optimised for the face detected. • Move the Control joystick (./.) to select “Face Detection,” and then press the OK button. - Detects a face and shows a frame on it. The detected face image is optimised automatically. 0:00:00 [475Min]STBY 9999 16M• The Face Detection indicator ( ) and Face Detection frame ( ) are not recorded. • Framing a person’s face while Face Detection is set will adjust focus and exposure to optimal values automatically. • The Face Detection may not operate depending on the recording conditions. For example, the Face Detection frame may appear when framing a 'face-like' shape, even when the subject is not a person's face. If this occurs, turn off the Face Detection feature. • The Face Detection feature will not work when framing the side of a person's face or operating while lack of illumination. You must be facing them "head-on" or occupying enough illumination. recording options Focusing manually during recording: This camcorder automatically focuses a subject from close-up to infinity. However, the correct focus may not be obtained depending on the recording conditions. In this case, use the manual focus mode. 1. Move the Control joystick (./.) to select “Manual Focus.” • The manual focus adjustment indicator appears. 2. Move the Control joystick (./.) to select the desired indicator to adjust focus, then press the OK button. • The manual focus setting will be applied and the ( ) indicator is displayed. 0:00:00 [475Min] STBY Manual Focus 16M9999 Focusing on a nearer subject To focus on a nearer subject, move the Control joystick (.). Focusing on a further subject < Nearer subject > < Further subject > To focus on a further subject, move the Control joystick (.). • The nearer or further icon ( / ) appears between the indicators when focus adjustment reaches the end. • The adjusted value is applied right after moving the Control joystick (./.) to adjust the focus. Manual focus is recommended in the following situations : • The subject is dark. • When the background is too bright • Subject through a window that is stained or wet • Subject with dense horizontal or sloping stripes • Distant subject behind a nearby wire fence • Walls, atmosphere and other low-contrast subject • Emitting strong light or reflecting subject • Focusing on a subject near the boundary of the frame • You can easily adjust the focus using the Shortcut menu button. .pages 26~27 • Manual focusing focuses on a point in the framed scene while auto focusing focuses on the centre area automatically. • Use the zoom function to catch the desired target before manually adjusting the focus. If you use the zoom function after manual focusing, refocusing is required. • Before focusing manually, check if the “Digital Zoom” is turned off. When “Zoom Type” is set to “Digital Zoom,” manual focusing will not focus with accuracy. Turn the “Digital Zoom” off. .page 63 Anti-Shake(HDIS) Use the Anti-Shake (HDIS) function to compensate for unstable images caused by shaking movements when holding the camcorder. PRECHECK! Select the Record ( / ) mode by pressing the MODE button. .page 24 1. Press the MENU button • Control joystick (./.) • “Anti-Shake (HDIS).” 2. Select the desired submenu item with the Control joystick (./.), and then press the OK button. 3. Press the MENU button to exit the menu. Submenu Items items contents on-screen display “Off” Disable the function. - “On” The Anti-Shake (HDIS) function is enabled to compensate for shaking movements. Exit STBY 0:00:00 [475Min] Anti-Shake(HDIS) Off On STBY 0:00:00 [475Min] Anti-Shake(HDIS) Off On Exit Tip Use the Anti-Shake function in the following cases: • Recording when using the zoom extensively. • Recording a close up picture of a small object • Recording while walking, or moving • Recording through the window, from inside a vehicle • The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to On. • Gross camcorder shake may not be entirely corrected even if “Anti-Shake (HDIS): On” is set. Firmly hold the camcorder with both hands. • When this function is set to “On,” the actual movement of the subject and the movement displayed on the screen may be slightly different. • When recording in dark lighting at high magnification with this function set to “On,” may cause after images. In this case, we recommend using a tripod (not supplied) and turning the “Anti-Shake (HDIS)” to “Off.” recording options Digital Effect Using the digital effect function gives your recording a creative look. PRECHECK! Select the Record ( / ) mode by pressing the MODE button. .page 24 1. Press the MENU button • Control joystick (./.) • “Digital Effect.” 2. Select the desired submenu item with the Control joystick (./.), and then press the OK button. 3. Press the MENU button to exit the menu. Exit STBY 0:00:00 [475Min] Digital Effect Sepia Off BLK&WHT Off Disables the function. BLK&WHT ( ) Changes the images into black and white. Sepia ( ) This mode gives the ima...
Эта инструкция также подходит к моделям:Видеокамеры - SMX-F400BN (14.21 mb)
Видеокамеры - SMX-F400BP (14.21 mb)
Видеокамеры - SMX-F400LP (14.21 mb)
Видеокамеры - SMX-F400RP (14.21 mb)