Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1 Click the [Unplug or eject hardware] icon on the task tray. Click this icon. task tray 2 Click [Unplug or eject hardware] ([Safely remove Sony Camcorder] in Windows XP). 3 Click [OK]. 4 Disconnect the USB cable from the camcorder and computer. If [USB MODE] does not appear on the LCD screen, do only step 4 above. For Windows 98/Windows 98SE Do only step 4 above. Recommended connection Connect as shown in the following illustrations to operate the camcorder correctly. • Connect the camcorder to a computer via the USB cable (supplied). Make sure no other USB devices are connected to the computer. Connecting to a Windows computer Click here. ,continued Connecting to a Windows computer • If your computer has a USB keyboard and a USB mouse as standard equipment, leave them connected and connect the camcorder to an available USB jack with the USB cable (supplied). The location of the DV Interface varies depending on the model. Refer to the separate Camera Operations Guide supplied with your camcorder for the location. To disconnect the i.LINK cable Turn off the power of the camcorder and disconnect the i.LINK cable from the camcorder and computer. z Tip • You can use other image editing software that can read video signals to edit the recorded pictures. For details on the operation of other software, refer to the help files or the operating instructions of that software. b Notes • Operation is not guaranteed if you connect two or more USB devices to the computer. • Operation is not guaranteed if you connect the USB cable to the USB jack on a keyboard or USB hub. Make sure to connect the cable to the USB jack on the computer. • Operation is not guaranteed on all the recommended environments. Connecting with an i.LINK cable (optional) (DV format models only) to i.LINK (IEEE1394) connector i.LINK cable (optional) to DV Interface Connecting to a Windows computer Step 5: Checking the connection Playing pictures recorded on a tape on your computer Before following the procedure below, start up ImageMixer Ver.1.5 for Sony and check the connection. b Note • Before following the procedure below, make sure you remove the “Memory Stick” from the camcorder. 1 Double-click [ImageMixer Ver.1.5 for Sony] on the desktop. 2 Click (Capture Environment). 3 Click (USB Device Capture Mode) if you are connecting via a USB cable, or click (DV Camcorder Capture Mode) if you are connecting via an i.LINK cable (DV format models only). 4 Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode. Use the supplied AC Adaptor as the power source. For details, refer to the separate Camera Operations Guide supplied with your camcorder. 5 Touch [P-MENU], [MENU], [ (STANDARD SET)] and [USB-PLY/ EDT], then touch to select [USB STREAM]. For details, refer to the separate Camera Operations Guide supplied with your camcorder. This operation is not necessary when connecting the camcorder to the computer via an i.LINK cable (p. 16). 6 Connect your camcorder to the computer (p. 13). Connecting to a Windows computer ,continued Connecting to a Windows computer 7 Click (Playback) to see if the picture appears on the preview screen on your computer. Preview screen It may take some time before it is displayed. If the playback picture does not appear on the screen Check to see if the USB driver is correctly installed on your computer (p. 41). To cancel the operation 1 Click (Close) at the upper right- hand corner of the screen on your computer to quit ImageMixer Ver.1.5 for Sony. 2 Turn off the camcorder, then disconnect the cable. Viewing pictures recorded on a “Memory Stick” on your computer 1 Insert the “Memory Stick” into your camcorder. 2 Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode. 3 Touch [P-MENU], [MENU], [ (STANDARD SET)] and [USB-PLY/ EDT], then touch to select [STD-USB]. For details, refer to the separate Camera Operations Guide supplied with your camcorder. 4 Connect your camcorder to the computer (p. 13), then see if Image Transfer starts up automatically. [USB MODE] appears on the LCD screen and the pictures stored in the “Memory Stick” are copied to the computer. Then, ImageMixer Ver.1.5 for Sony starts up automatically and a list of pictures appears (p. 26). If Image Transfer does not start See “Troubleshooting” (p. 44) for details. Connecting to a Windows computer Managing pictures on a Windows computer Copying and viewing pictures recorded on a tape You can play or edit pictures on your computer without connecting the camcorder each time, by copying the pictures recorded on your tape to the computer. If your camcorder is a MICROMV format model, you can also edit the pictures with the supplied CD-ROM (MovieShaker Ver.3.1 for MICROMV). For details, refer also to the separate MovieShaker Application Guide supplied with your camcorder. For Windows 2000/Windows XP Log on as Administrators. 2 Start up the computer, then d...
Эта инструкция также подходит к моделям:Видеокамеры - DCR-IP1E (1.91 mb)
Видеокамеры - DCR-PC330 (1.91 mb)