Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Figure 2. Scale front view measurements. ............................................ 8 15.16" 6 1.32" 2 1.4" 16" 13 1.8" 1" Figure 3. Scale side view measurements. Tomaintainaccuracy,thescale should remain hanging and not be allowed to rest on the ground for a significant amount of time. ............ Like all tools there is potential danger when operating this tool. Accidents can be caused by lack of familiarity or failure to pay attention. If normal safety precautions are overlooked or ignored, serious personal injury may occur. Model T10008 2000 Kg Digital Crane Scale -5 SECTION 4: OPERATIONS Scale Functions ................ Remote Receiver Window Tare LED Display ON/OFF Button Load Stable LED Display Tare Button Hold LED Display Figure 4. Scale face. Turning the Scale ON After your crane scale has been properly suspended, familiarize yourself with the functions both on the scale and on the remote control. Begin by holding down the ON/OFF button on the scale to turn it ON (Figure 4). Each time the scale is turned on, it will flash a series of displays. Use the table below to familiarize yourself with the display and its meanings. Function Display Action Off/On 2000 Maximum capacity in Kg. U X.XX Current battery voltage 99999 Warming up 88888 77777 66666 55555 44444 33333 22222 11111 00000 -XX Current weight 0 Steady light will engage, ready To guarantee accuracy for your crane scale, allow it warm up without a load for 3-5 minutes. Tare Function The tare function will allow you to automatically deduct the weight of the weighing platforms or containers, resulting in a final weight of only the items that you want weighed (the net weight). When your scale is ready, attach your weighing platform to the lifting hook at the bottom of the scale, then wait until the "STEADY" light comes on. Before placing any items on the platform, deduct the weight of the platform by pressing the TARE button on the scale (Figure 4), or by pressing Tare on the remote control. After you have selected the Tare function for the platform, the scale will return to 0 lbs. between loads until you turn off the scale. Power Saving If the load is left at stable status, ("STEADY" as shown in Figure 4), for longer than 15 minutes, the screen will flash "–" to save power and will return to normal weighing readings when the load is changed. If the load is left at stable status for over 60 minutes, the scale will turn OFF automatically. -6-Model T10008 2000 Kg Digital Crane Scale Overload Warning Remote Control If the load exceeds the maximum capacity Functions (net + tare weight), OVER will be displayed on the screen. DO NOT overload the scale. Overloading the scale may result in injury, damage the scale, and void your warranty. Turning the Scale OFF To turn the scale OFF, hold down the ON/OFF button on the scale or hold down the OFF button on the remote control. Note: The scale will not turn OFF unless it is at the main weighing screen. .................................................. Zero Tare Display LED MR M+ F1 Clear Off Hold ........... Do not use this scale during lightning and rain storms or other inclement weather. Turn the scale OFF, unplug any charging equipment, and remove the battery. ........... If this scale is used for the selling of goods, it must be "Legal for Trade" and calibrated regularly. Figure 5. Remote control buttons. Note: The remote control is a generic remote and may contain buttons that will not be used with this particular model. Should you lose the included remote control, these functions cannot be completed. To obtain a replacement controller from Grizzly, call 1-800-523-4777. Zero Function Generally, your scale will initially read the weight of the hook. To return your scale to zero lbs., press the button on the remote control. Model T10008 2000 Kg Digital Crane Scale -7 Scale Battery The scale will automatically display the current scale battery voltage when you turn the scale ON and OFF. To check the voltage during use, press the MR button on the remote control and the screen will display SHIFT. Press the F1 button and the screen will display U X.XX. To return to the main display, press MR again. When the battery voltage is lower than U 5.80, the screen will flash to alert you. The scale will continue to display for approximately one minute longer and then turn OFF automatically. The scale will need to be charged before further use. The Model T10008 has an easy to remove battery for convenient charging. Remove the two outer cap screws from the back of the scale body. Slide the battery out and unplug the wire clip connection, as shown in Figure 6. Figure 6. Unplugging the battery. To recharge the battery: 1. Turn the scale OFF. 2. Connect the supplied adapter into the socket located in the back of the scale, then into a grounded 110V outlet. The light turns orange while charging and turns red when charging is complete. Note: The battery should re-charge for at least 8 hours. Hold Function When the load has...