Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Jenn-Air, модель KPEC992M

Производитель: Jenn-Air
Размер: 445.17 kb
Название файла: d71d5fdb-5fc2-4fbf-89fa-32cb580c2ee8.pdf
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Before installing the hood liner, read the Installation Instructions for the exterior blower used with hood liner. Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector's use. 436001862/9763389 Quick Reference Table of Contents: Pages Before you start Electrical requirements Cabinet dimensions Product dimensions Installation steps Use and Care Information Wiring diagram Warranty Requesting Assistance or Service 2 2 3 3 4 -5 6 -7 7 8 9- 10 36" (91.4 cm) and 48" (121.9 cm) Hood Liner for use with Exterior Blower models KPEC992M (900 cfm [25.5 m3/m]) or KPEU722M (1200 cfm [34.0 m3/m]) only. Hood liner requires a custom enclosure. IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Before installing the hood liner, read the Installation Instructions for the exterior blower used with hood liner. Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector's use. 436001862/9763389 Quick Reference Table of Contents: Pages Before you start Electrical requirements Cabinet dimensions Product dimensions Installation steps Use and Care Information Wiring diagram Warranty Requesting Assistance or Service 2 2 3 3 4 -5 6 -7 7 8 9- 10 Before you start... Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” obey all safety messages. or “WARNING”. These words mean: DANGER You can be killed or seriously injured if you don’t immediately follow You can be killed or seriously injured if you don’t follow instructions. WARNING All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. instructions. Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the clearances specified. Check the location where the hood liner will be installed. The location should be away from strong draft areas, such as windows, doors, and strong heating vents. Mobile home installation The installation of this hood liner must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the Standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local codes. IMPORTANT: Observe all governing codes and ordinances. WARNING — TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable Codes and Standards, including Fire Rated Construction. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. Ducted fans must always be vented to the outdoors. WARNING — To reduce the risk of fire, use only metal ductwork. Thi...

Эта инструкция также подходит к моделям:
Вентиляторы - KPEC992M (445.17 kb)
Вентиляторы - KPEC992M (445.17 kb)
Вентиляторы - KPEC992M (445.17 kb)
Вентиляторы - KPEC992M (445.17 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории