Войти:
Оценок - 4, средний балл: 4.5 ( )

Инструкция по эксплуатации Electrolux, модель ERCE90AS

Производитель: Electrolux
Размер: 869.09 kb
Название файла: fc4fe4fb-9613-419b-9551-828a4adfb398.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The use of bends should be avoided. Rigid flexible ducting is suitable, although loose flexible ducting is unacceptable. All ducting must be fire retardant. 6. Connect an internal flue pipe (not included) between the fan outlet to the inlet of the T-piece/flue cover mounting bracket (depending on ducting mode). NOTE: Before installing outer flue cover, ensure the power cord is connected to a suitable powerpoint. 4 installation/using the rangehood electrolux e:line rangehood Using the rangehood Installation of outer flue cover 7. You will need to separate the outer and inner flue cover sections, and carefully peel the protective coating from both. Additionally, remove the protective coating from the hood body. Carefully reassemble the outer and inner flue sections by sliding the inner flue cover into the outer flue cover. 8. Holding both flue cover sections together, gently slide the inner flue cover section over the recirculating T-piece (for recirculating mode) or over the top-flue fixing bracket (for ducted mode) until the rear edge of the flue is touching the rear wall. Carefully lower the outer flue cover section to the top of the hood body. 9. With filters removed, fix the outer hood section to the hood body (using the M5x20mm screws supplied) by fixing through the under side of the hood body. threaded when attaching the outer flue cover. 10. If installed in recirculating mode, insert the optional carbon filter (not supplied). H) Electrolux 1 ON/OFF Low Med Hi Light Timer ^ P O / • O ,/ y o ,/ O / £Z / / 1 2 / 3 / 4 / 5 6 red LEDs buttons To switch Canopy ON and OFF Depress push button 1 to turn the unit ON and depress push button 1 again to turn the unit OFF. Setting the power level required Depress either of the push buttons 2,3 or 4 to select the desired power required for the type of cooking you are doing. Confirmation of the level selected is indicated by the red LED indicator above the selection chosen. Below is a guide only of the type of cooking being performed and suggested settings. setting Low - light frying/boiling setting Med - frying/wok cooking/heavy boiling setting Hi - grilling, intensive frying and wok cooking To switch Lights ON and OFF Depress push button 5 to turn the lights ON and depress push button 5 again to turn the lights OFF. Confirmation of the light being selected is indicated by the red LED indicator above the light push button. Using the Timer At the end of cooking if the timer is switched on the canopy rangehood will continue to run for an additional 15 minutes to remove any odours that remain at the completion of cooking. After 15 minutes the canopy will turn itself OFF. Depress push button 6 to turn the timer ON and depress push button 6 again to turn the timer OFF, if you do not wish to let it run for the full amount of time. Confirmation of the timer being selected is indicated by the red LED indicator above the timer push button. 11. Replace the aluminium mesh filters. Your Electrolux rangehood is now ready for use. electrolux e:line rangehood maintenance and cleaning/changing the halogen lamps 5 Maintenance and cleaning Changing the halogen lamps • Before maintenance or cleaning is carried out, the canopy rangehood should be disconnected from the main power supply. Ensure that the rangehood is switched off at the wall socket and the plug removed. • External surfaces are susceptible to s...

Эта инструкция также подходит к моделям:
Вентиляторы - ERCE90AS (869.09 kb)
Вентиляторы - ERCE90AS (869.09 kb)
Вентиляторы - ERCE90AS (869.09 kb)
Вентиляторы - ERCE90AS (869.09 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории