Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Dispose carefully of the packaging material so that it is out of the way of small children. Position The cooker hood should be mounted freely hanging on the wall. The cooker hood must be at least 60 cm above electric hobs or electric ranges, or at least 70 cm above gas burners or gas ranges. The cooker hood cannot be connected to flues of other appliances that run on energy sources other than electricity. Please, keep to the provisions of official directives regarding fume discharge. Electrical connection The hood has a power cable with earth connection and the rated voltage is 220 - 240 V. Wall unit mounting - Fig. 6 • Make the holes on the bottom of the cupboard (2), using the drilling template (1). Provide an hole also for exhausting pipe (4) ONLY if is decided to use the hood in Exhausting version (3). • From inside the cupboard, insert the 4 supplied screws (5) and tighten them in the appropriate holes on the appliance. Fig. 6 Wall mounting - Fig. 7 • Sign a centerline onto the wall (1). Fit the template onto the wall (2). • Fix the drilling template to the wall. • Make 3 O 8mm holes in the wall (3), 2 at upper points, 1 as desired at lower points. • Insert the three O 8mm expansion plugs into the wall (4). • Insert 2 5x45 screws (5) but do not tighten them completely, hang the hood (6). • Adjust the unit so that it is positioned at a right angle to the wall by turning the two screws on lower side (7). • Tighten the 2 upper screws (8). • From inside the hood, insert the third 5x45 screw into the lower hole (9) and tighten (10). Fig. 7 54 55 AEG Hausgerate GmbH Postfach 1036 D-90327 Nurnberg © Copyright by AEG LI1WCB Ed. 07/02 ...
Эта инструкция также подходит к моделям:Вентиляторы - 1400 D (1.01 mb)
Вентиляторы - 1400 D (1.01 mb)
Вентиляторы - 1400 D (1.01 mb)
Вентиляторы - 1400 D (1.01 mb)