Оценок - 3, средний балл: 4 ( )

Производитель: Air King Размер: 184.91 kb Название файла: Язык инструкции:

Select the grill mounting point within the area to be ventilated that does not interfere with a ceiling joist. To ease installation, locations of framing beams within the walls or joists supporting the ceiling should be considered. Collar/damper is provided with a perforated hanging strap for attachment directly to a beam or joist. Allow sufficient space between the collar/damper and the beam to attach the duct work. If the location of the grill does not allow direct attachment, a cross-member mounted to the framing should be used. 2. Bend the mounting straps attached to the collar outward so they are straight across (Figure 3). Figure 3 Collar/Damper Mounting Strap MountingStrap SECTION 4 New Construction 1. Install the collar/damper in the selected location using the provided 1" wood screws through the mounting strap. The mounting height is determined by the thickness of the final wall/ceiling material. Ensure that the edge of the collar/damper will be flush with the finished wall/ceiling material (Figure 4). 5S7635036 New 9-06 2 of 12 2. Once the wall/ceiling material is in place, install the grill into the collar by pushing it firmly inward towards the collar until it fits flush against the wall/ceiling material (Figure 5). Figure 4 Collar/Damper Wall/Ceiling Material Joist/Stud Collar/Damper Screws Joist/Stud Figure 4 Collar/Damper Wall/Ceiling Material Joist/Stud Collar/Damper Screws Joist/Stud Grill Figure 5 Collar/Damper SECTION 5 Existing Construction 1. Place the collar/damper in the selected location and trace a circle onto the surface. From the interior side of the room, cut through the surface. Please note: Take care not to damage the ceiling and make a smooth cut (Figure 6). Figure 6 2. Position the collar/damper in the previously cut hole so that it is flush with the finished ceiling and secure to the joist/stud using the provided 1" wood screws through the mounting strap (Figure 4). 3. Install the grill into the collar by pushing it firmly inward towards the collar until it fits flush against the wall/ceiling material (Figure 5). SECTION 6 Ducting CAUTION: ALL DUCTING MUST COMPLY WITH LOCAL AND NATIONAL BUILDING CODES. NOTE: Insulated ducting is required for bathroom exhaust applications, where ducting passes through unconditioned space or where noise is a factor. Failure to use insulation could result in excessive condensation buildup within the duct, and undesirable sound levels within the room. Duct runs should have as few bends as possible. NOTE: Flexible insulated ducting may be used where allowed by local code. For the quietest possible installations, it is recommended a minimum of 8' of insulated flexduct be used between any exhaust grill and fan. When using flexible type duct work, duct should be stretched as tight and straight as possible. Failure to do so could result in dramatic loss of system performance. Flexible duct should be connected to the fan with screw clamps or duct tape. All connections...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: