Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
We would like you to be able to fully utilize all features of this portable air cooler, so please take the time to read this owner’s manual in full prior to using the unit. Here are a few of the features of this appliance: x Strong airflow with a quiet motor x Washable air filter x Fabric water curtain for air cleaning and cooling x Auto tower oscillation function x Large water reservoir for extended cooling x Built-in timer x LED display This air cooler combines a slim, attractive exterior with powerful air cooling- plus it includes air purification functions as well. Warnings x Use this unit only on 110-115-120V, 60Hz electrical circuits x View the rating label on the unit for power requirements x Keep all fingers and other foreign objects clear of the internal fan at all times x Contact EdgeStar Service for all technical support and service at 866-319-5473 x Service by licensed technicians only x Do not use flammable liquids or gases around the unit x Designed for indoor use only x Disconnect the unit prior to cleaning or service x Please do not pull the cord to unplug the unit- pull on the plug only Suggestions x Do not fill with water above the “MAX” line x When the unit has water in it, be careful when moving it from place to place x If the unit is tipped over while filled with water, immediately unplug the unit and right it. Allow the unit to dry for 24 hours prior to operating it to minimize the risk of damaging the circuit board. x Do not put any foreign objects into the unit or water reservoir x Clean the exterior of the unit with a soft cloth and a mild soapy water solution only x If the unit becomes noisier as it gets older and/or the airflow becomes less robust, try cleaning the fabric water curtain and pre-filter x Make sure the unit has adequate ventilation around it to ensure airflow both into the rear of the unit and out of the front of the unit x The unit will cool best in low ambient humidity situations x Unplug the unit when not in use x Never allow unobserved children to play with or around the unit x If the power cord is damaged, an authorized technician must replace it x Clean the water reservoir regularly Components 1. Control panel 2. Display 3. Air outlet 4. Water level indicator 5. Power cord 6. Air inlet 7. Fabric water curtain 8. Pre-filter 9. Water port door 10. Water port 11. Drain plug 12. Caster (unit has 4 casters) Included Accessories x Ice packs (2) x Remote control x Owner’s manual and other literature Control Panel and Display Note: the buttons on the remote control have the same functionality as those on the main control panel x ON/OFF- this button turns the unit power on or off x TIMER- each time this button is pressed, the digit in the middle of the display increments up by 1. The digit in the display corresponds to the amount of time (in hours) that the unit will run before shutting itself off. If you do not select a timer setting, the unit will run continuously x WATER - this button turns on or off the cooling, humidifying, and air cleaning function. When the “COOLER/HUMIDIFIER” light on the control panel is lit, the unit pumps water from its reservoir over the fabric water curtain. As air is drawn past this water, the endothermic effects of evaporation result in cooling. Additionally, particulate matter and smoke from the air will be “washed” out of the air and into the water reservoir. x SWING- this button turns on or off the oscillation function. When the unit oscillates, the base remains still and the upper part of the tower turns back and forth, directing airflow around the room x SPEED- this button adjusts the speed. There are three speed settings for airflow. Note that when the unit is initially turned on, it starts on medium speed and changes to low speed automatically x MODE- this button toggles the airflow functions. There are three functions: o Normal/manual- this mode, represented by three horizontal wavy lines, allows you to manually set the airflow speed o Natural/variable- this mode, represented by a mountain, automatically shifts the airflow speeds between the three settings o Sleep- this mode, represented by “ZZZ”, operates like the Normal/manual mode, but the airflow speed gradually decreases over a period of 1-2 hours, and the unit eventually turns itself off. The higher the initial airflow setting, the longer the unit runs before shutting off, and the greater the different airflow speeds the unit cycles through prior to shutting off Unpacking and first using the unit x Carefully open the box(es) and take the unit out. Remove all packing/plastic bags, etc. x Set the unit upright x Plug the unit in x Open the water port and fill the unit with water. Do not over-fill the unit. x Close the water port door x Turn the unit on with the ON/OFF button and select your desired settings Note: the unit includes two ice boxes. To use them to boost the cooling of the unit, freeze them. Then put them into the unit’s water reservoir. You may use them one at a ti...