Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Talk. When call is completed: Speakerphone or will flash. Speakerphone 1 4 Push and release button. Phone will auto m at i cally disco n n e ct. Line 1 Line 2 Note If both lines are flashing,you have the option to choose either line. Select line to answer. To answer other line, put first line on HOLD; push and release other line. Talk Note You can only end the call from the base by pushing and releas ing the button. Speakerphone 1514 CP9135 manual layout.6 10/20/98 12:41 PM Page 22 Operation Operation Placing Calls Placing Calls From The Ha n d s e t Placing Calls From The Base Placing Calls From The From The Base Handset 1 Pick up handset: Note If you have pulse phone service, use the * button to change from pulse to tone dailing. Line 1 Line 2 to select line, or Speakerphone 1A Push and release or to select line, or Line 1 Line 2 Push and release or 2A Push and release Talk button to automatically 1B Push and release button to automatiselect Line 1 or the unused line. cally select Line 1 or the unused line. Wait for dial tone and then place your call. 2 Wait for dial tone and place your call from the base keypad. 1716 2B 3 # CP9135 manual layout.6 10/20/98 12:41 PM Page 24 OperationOperation Channel Selection Flash Channel Flash Selection Should you experience interference: handset or base Channel Push and release button. The CP-9135 will scan for and advance to a clearer channel when you push and release the Channel button. channel change. • If three beeps are heard the channel change was not successful. Move closer to base and Channel press and release button again. Push and release FLASH button to interrupt the phone line to access features such as: •Call Waiting • Three Way Calling that might be offered by your phone company. Secur - LocTM Secur-Loc™ An exclusive security measure to protect your phone from being accessed by another cordless phone. Secur-LocTM activates automatically every time your handset is placed in the base. Note Please also refer to questions 3, 5 and 6 in the Frequently Asked Questions section on page 46 for more information about interference. • Two double beeps will indicate a successful 1918 CP9135 manual layout.6 10/20/98 12:41 PM Page 26 OperationOperation 4 Level Volume Control Mute 4 Level Volume Mute Control Your CP-9135 fe at u res a MUTE button on the base. While in a conversation: Mute 1Your CP-9135 has a four level volume control on Push and release the button,which shuts the side of the handset. off the base microphone.The Mute will illuminate on the base.You will still be able to hear To raise or lower the volume, push the UP your caller but they will not be able to hear arrow for higher volume;push the DOWN you or a conversation you might be having. arrow for lower volume. Mute 2 Push and release the button again to Hearing Aid Hearing Aid Compatibility rejoin the conversation. The will go off Mute on the base. Compatibility The CP-9135 handset is compatible with induc tively coupled hearing aids (HAC). 2120 CP9135 manual layout.6 10/20/98 12:41 PM Page 28 OperationOperation Last Number Delayed Redial 2322 1 2 3 4 3 4 Push and release FLASH button. Push and release REDIAL/PAUSE button. Listen for dial tone. The number will be redialed. Push and release REDIAL/PAUSE button. The number will be redialed. Last Number Instant Redial Last Number Instant Redial Each time you dial a number, that number is stored in the REDIAL memor y. Up to 32 digits can be stored. To recall the number after receiving a busy signal: handset or base Last Number Delayed Redial If steps 1,2 and 3 from the “Last Number Instant Redial” still result in a busy signal,hang up. If you would like to try again in a few minutes, push and release TALK button for dial tone,then: handset or base CP9135 manual layout.6 10/20/98 12:41 PM Page 30 Operation Operation Memory Number Storage Memory Number Storage The CP-9135 will store up to 10 frequently called numbers. Note To store numbers from the base follow the same proceedure used for the handset. 3 Push and release button again. There will be 2 double beeps. Note 1 1.You may also use the Push and release button once. button in memory to temporarily change from pulse to tone dialing. 2.The REDIAL/PAUSE button in memory enters a 3 second delay. Note Enter name beside MEMORY number on the memory label 4 Assign memory position by en tering keypad provided with the unit. number from 0 to 9. There will be 2 double beeps to confirm number storage. Memory Memory Enter digits of n u m ber to be sto re d (up to 16). 2 Repeat for additional numbers to be stored in memory. 2524 Operation Operation CP9135 manual layout.6 10/20/98 12:41 PM Page 32 Operation Operation CP9135 manual layout.6 10/20/98 12:41 PM Page 32 Memory Number Dialing To Find The Handset To Find The Memory Number Handset Dialing 1 The handset can be located when it’s away from Access a line. the base.To locate the handset: Note Memory dialing from base uses same procedure as handset. 2 Memory Page...