Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
All exhaust must be ducted to the outside. Use Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. Some Ducting Options: side wall cap w/ gravity damper side wall cap w/ gravity damper Soffit or crawl space Roof Pitch w/ Flashing & Cap 1-5/32” 10-11/16” 5-15/16” 10-5/16”11-13/16” 27-9/16”26-19/32” 5” 9-27/32” 1-1/16” 11-13/16” 4-3/32” 1-1/4” 3-3/4” BACK FRONT C/L 10-5/8” (cut out) 26-7/8” (cut out) = cut out dimension cut out dimension Page 2 Page 3 INSTALLATION SPECIFICATIONS 10-5/16” 26-19/32” 11-3/16” 27-9/16” 6" C/L 1-3/8” 5-1/8” 1/2" Elec. K.O. 2-3/8" = cut out dimension cut out dimension Tornado 1 unit (AK8100S) INSTALLATION Page 4 Page 5 9-27/32” 27-9/16” 11-3/16” SPECIFICATIONS 15-9/32” 16-3/16" 2” 2-13/16" 34-7/16 8" 1/2"Elec. K.O. 16-3/16" C/L = cutout dimension cut out dimension Tornado 2 unit (AK8200S) 33-7/16" 34-7/16” 7-7/8” 10” 10-5/8” (cut out) 26-7/8” (cut-out) 33-1/2” (cut out) 15-3/8” (cut out) INST ALLA TIO N CONTROLS & FEATURES INSTALLATION Locking clip Controls Power supply cableEntry into range hood Ductwork Front View Attach 2 screws to each long side of AK8100/AK8200 Side View wood blocking wood frame wood frame wood frame wood frame Mounting the Range Hood 1. Determine and mark the mounting position of the range hood with a pencil. 2. Cut out the opening where the range hood will be installed. 3. Cut out wall or ceiling area for clearance of ductwork. Install ductwork prior to range hood. 4. Determine location for the power supply cable. After drilling access hole, rout the cable into the electrical box of the range hood. Secure with a cable lock and connect to range hood electrical system. 5. Position range hood into location and ensure spring locking clip has locked into position. 6. Fasten wood screws into wood frame opening via the long side. Wood blocking may be necessary if wood frame is too thin. ELECTRICAL WARNING All Electrical work must by performed by qualified electrician or person with similar technical know how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances. Electrical Supply: This appliance requires a 120V 60Hz electrical supply. , and connected to an individual, properly grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire w/ ground. Please also refer Electrical Diagram labeled on product. Cable Lock: A cable locking connector (not supplied) might also required by local codes. Check with local requirements and codes, purchase and install appropriate connector if necessary. Cable Lock Page 6 CONTROLS & FEATURES (AK8100S/AK8200S) 1 2 Lights On/Off Speed Selection 1 Speed Selection This switch controls the speed of the blower. The first position is low speed, the second is medium speed, and the third is high speed. 2 Lights On/Off Turn lights on or off by moving this switch. CONTROLS & FEATURES (AK8000AS) III II I 0 II I 0 Lights Bright / Dim / Off 1 2 Speed Selection This switch controls the speed of the blower. I is low speed, I I is medium speed, and I I I is high speed. Lights Bright / Dim / Off This switch controls the lights. Slide switch to I for dim lighting and I I for bright lighting,. Page 7 MAINTENANCE MAINTENANCE CLEANING (AK8100S, AK8200S) Models AK8100S and AK8200S hoods are designed with a self cleaning feature. The centrifigal blower system automatically liquefies cooking residue accumulated in its internal housing and deposits the residue in the residue cups. Nevertheless, grease from cooking can also dry and adhere in the internal housing. Running the self clean function periodically will flush out accumulated residue in the range hood’s internal housing. Cleaning should be completed approximately once a month under normal use. Non corrosive, non abrasive grease cutting spray detergents are recommended. Self Cleaning Instructions: Remove safety grilles by unscrewing the thumb screw on each gr...
Эта инструкция также подходит к моделям:Вентиляторы - AK8000AS (379.36 kb)
Вентиляторы - AK8100S (379.36 kb)