Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
AM / PM 2. Clock 3. Radio ON 4. Sleep mode ON 5. Alarm 1 / 2 ON 6. Low Battery indicator BACK VIEW (FIG. 2) 1 2 3 5 4 6 7 8 9 10 11 1. FOCUS Wheel: Adjust Projection Focus 2. RADIO: Turn radio On / Off, Select AM / FM 3. ALARM 1 and 2: Select alarm type, BEEP / OFF / RADIO 4. + / - : Increase / decrease values of the selected setting 5. / SET / , : Change settings / display / View respective alarm status; set alarm 6. DIMMER: Select display brightness LO / HI 7. PROJECTION ON: Enable / disable continuous projection 8. 180° ROTATION: flip image180° 9. RESET: Reset unit to default settings 10. AC / DC Socket 11. Battery compartment TOP VIEW (FIG. 3) 1 23 1. VOL: Mute / adjust radio volume 2. SNOOZE / SLEEP: silence alarm for 8 minutes 3. TUNE: Select radio frequency GETTING STARTED INSERT BATTERIES 1. Plug AC / DC adaptor into socket. Memory backup: 2. Remove the battery compartment cover. 3. Insert the batteries, matching the polarities (FIG. 2). SET CLOCK 1. Press . 2. Press + or - to change the settings. 3. The settings order is: 12/24 hr format, hour, minute. ALARM To set the alarm: 1. Press and hold desired SET / . 2. Press + / - to set hour / minute. 3. Press (or 10 seconds of inaction) to return display to clock mode. To activate / deactivate alarm: Slide to: • OFF – disable alarm • BEEP - beep alarm • RADIO – Radio alarm To silence the alarm: • Press SNOOZE / SLEEP to silence it for 8 minutes OR • Press , SET / , + / - to turn the alarm off and activate it again after 24 hours. RADIO To activate / deactivate radio: 1. Slide RADIO ON/OFF to turn on the radio. 2. Slide AM / FM to select. 3. Turn TUNE rotary dial to select frequency To adjust volume: • Turn VOL rotary dial to mute / adjust volume. To activate sleep timer: • Press SNOOZE / SLEEP to enter sleep mode. • Press SNOOZE / SLEEP to change the sleep time. setting (120, 90, 60, 30, 15, 0 min). PROJECTION This unit projects time information for your convenience. For continuous projection: • Slide PROJECTION switch when adaptor is connected, to enable / disable. To flip projected image by 180°: • Press 180° Flip. To focus image: • Turn FOCUS wheel. NOTE If projection is illuminated, do not look directly into the projector. RESET Press RESET to return to the default settings. PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not cover the ventilation holes with any items such as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit ’s internal components. This invalidates the warranty. • Only use fresh batteries. Do not mix new and old batteries. • Images shown in this manual may differ from the actual display. • When disposing of this product, ensure it is collected separately for special treatment. • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer’s care instructions for information. • The contents of this manual may not be reproduced without the permission of the manufacturer. • Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. • Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use. NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 183 x 67 x 81mm (72 x 26.4 x 31.9in) Weight 386 g (13.6 oz) without battery Power 6 V AC adaptor 2 x UM-4 (AAA) 1.5 V batteries ABOUT OREGON SCIENTIFIC Visit our website (to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp OR Call 1-800-853-8883. For international inquiries, please visit: www2.oregonscientific.com/about/international.asp. EU-DECLARATION OF CONFORMITY Hereby, Oregon Scientific, declares that this LED Clock with Projection & Analogue AM/FM Radio (Model: RRA320P) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found ...