Оценок - 5, средний балл: 4
(
)
)
|
Фото и характеристики Diamondback 900Ub |
Фрагмент инструкции
Press ENTER key to enter program set up mode. The message display will take you through the pro- Enter Age The message window will flash a message of “ENTER AGE”, then “AGE = XX” with the number 1. blinking. You may press 2. UP or DOWN keys to adjust the age. After age adjustment, the message display will switch to display “PRESS ENTER” to indicate3. next step. Press ENTER to accept and enter Weight adjustment. Enter Weight The message window will flash a message of “ENTER WEIGHT”, then “WEIGHT = XXX LB” 1. with the number blinking. (WEIGHT = XXX KG” for metric system) You may press 2. UP or DOWN keys to adjust the weight After weight adjustment, the message display will switch to display “PRESS ENTER” to indi- cate next step. Press ENTER to accept and enter Time adjustment. Enter your workout time: The message window will flash a message of “ENTER TIME”, then “TIME = 30 MIN” and the 30 1. will be blinking. You may press 2. UP or DOWN keys to adjust the time. When the time setting reaches 60 min- utes, the display will show “TIME = 1HR 00MIN” instead. After time adjustment, the message display will switch to scroll “PRESS ENTER OR START”. You may press the ENTER or START/STOP key to begin this program. Or press the START/STOP key to accept current default values and begin the workout Default time = 30 minutes• Age and weight will be what was enter and saved in a previous workout 900Ub.Sr OM.R1.indd 900Ub.Sr OM.R1.indd 26-27 26-27 Workout Programs (Continued) During the Program Once the Enter or Start key is pressed, the Warm Up will be active. See Warm Up mode section for details. Main Display • As soon as the program will begins, the Dot Matrix will activate and the 1st segment of the program’s profile will start blinking • If there is a valid Heart rate signal being detected a heart shape will start blinking and the Heart rate graph will light up with the percentage of maximum heart rate. • The message “Time” will light up in the date display and the Time will start counting down. To switch the data being displayed press the DISPLAY key to select from Time, Calories, Pulse and Distance and to turn on and off the scan function. Message/Data Display four default data: Time, Level, Pulse & Calories and the LED on top of the Data Display key will be lit. • LED on the bottom of the key will light up. Press• DATA DISPLAY button to switch the display to “RPM, Speed, Distance & Watts”. The • As soon as the program begins. The message display will turn into workout data display and display Press the UP or DOWN key to adjust the intensity level from L1 to L16. The dot matrix window will up- START/STOP key is pressed, this program will end and Cool Down will The message display will flash a message “PROGRAM ENDED”&”COOL DOWN”. See Cool Down for Adjustment date the intensity profile accordingly. Ending the Program • • • key could be pressed to re-start the Manual program again. • key could be pressed and held for 2 seconds to skip the Cool Down and activate the Workout Summary immediately. Pause, Reset, Switch or Save a program See Console Operating Tips section for details, page 16 Random Getting Started The Random program is designed to allow the user to choose from an unlimited number of computer generated profiles at random. 27 6/11/2008 6/11/2008 9:56:25 AM 9:56:25 AM Workout Programs (Continued) Beginning the Program During idle mode, the message window displays a message “SELECT A PROGRAM”. To begin this program, press the RANDOM program key, the LED indicator above it will light up. Entering the program When the message display flashes, “RANDOM” and “PRESS ENTER”, it indicates you are about to select the Random program. Press ENTER Key to enter program setup mode or press the START/STOP key to skip the set up mode and use default values. Press ENTER key to enter program set up mode. The message display will take you through the program setup mode step by step as below: Enter Age 1. The message window will flash a message of “ENTER AGE”, then “AGE = XX” with the number blinking. 2. 3. 28 You may press UP or DOWN keys to adjust the age. After age adjustment, the message display will switch to display “PRESS ENTER” to indicate next step. Press ENTER to accept and enter Weight adjustment. Enter Weight The message window will flash a message of “ENTER WEIGHT”, then “WEIGHT = XXX LB” 1. with the number blinking. (WEIGHT = XXX KG” for metric system) You may press 2. UP or DOWN keys to adjust the weight After weight adjustment, the message display will switch to display “PRESS ENTER” to indi-3. cate next step. Press ENTER to accept and enter Time adjustment. Enter your workout time: The message window will flash a message of “ENTER TIME”, then “TIME = 30 MIN” and the 30 1. will be blinking. You may press 2. UP or DOWN keys to adjust the time. When the time setting reaches 60 min- utes, the display will show “TIME = 1HR 00MIN” instead. After time adjustment, the message display will switch to display “SET UP COMPLETED...
Эта инструкция также подходит к моделям:Велосипеды - 900Sr (2.23 mb)