Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Any doubt regarding compatibility should be discussed with your local authorized Specialized retailer. BOTTOM BRACKET WARNING! When placing the frame and/or bicycle in a repair stand, clamp the stand to the seat post and not the frame. Clamping the frame can cause damage to the frame that may or may not be visible. Your Specialized frame does not require any bottom bracket pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the threads. It is acceptable to chase the threads if applicable and necessary. Do not face bottom bracket cups. Ensure that the bottom bracket shell threads are clean and greased prior to installation. Recommended torque is 442 in-lbf (50 N-m). SEAT POST / SADDLE INSTALLATION Refer to your seat post installation guide prior to installation. Specialized road frames have a 27.2mm seat post diameter and require that the seat post have a tolerance of 27.08mm to 27.25mm. The Tarmac, Roubaix and Ruby Elite/Comp frames use a seat post collar specifically designed for these frames. Use of a different collar can cause damage to the frame or seatpost, resulting in failure (see fig.1 for proper setup). Tighten seat collar bolt to recommended torque of 55 in-lbf (6.2 N-m). COMPONENT TORQUE SETTINGS • Front derailleur: Recommended torque is 44 in-lbf (5.0 N-m). • Rear derailleur: Recommended torque for the rear derailleur is 70 in-lbf (7.9 N-m). Ensure that threads are clean prior to installation. • Seat collar: Recommended torque is 55 in-lbf (6.2 N-m). • Water Bottle Cage: Recommended torque is 35 in-lbf (4.0 N-m). To avoid damage to the bottle cage frame rivets, ensure that the cage doesn’t flex around the front derailleur clamp. If the cage doesn’t clear the clamp, use longer bolts and spacers to help the cage clear the derailleur clamp. Turn collar slot 180°oppositefrom frame slotGrease bolt threadsCHAMFER SEAT TUBE EDGES•Full radius of top edge• Along full length of frame slot• SEAT TUBE I.D. • SEAT POST O.D. FrameSlotGREASE27.2mmFrameSlotFRAME SLOTGREASERecommended Torque: 55 in-lbf (6.2 N-m) Fig.1 WARNING! Great care should be taken not to damage composite materials, including the frame and any composite components. Any damage may result in a loss of structural integrity, which may result in a catastrophic failure. This damage may not be visible in inspection. Before each ride, and after any crash, carefully inspect the bicycle for and dents, fraying, gouging, scratches through the paint, chipping, bending or any other signs of damage. Do not ride if the bicycle shows any signs of these signs. After any crash, and before riding any further, take the bicycle to an authorized Specialized retailer for a complete inspection. WARNING! Do not grease the seat tube surface that contacts the seat post. Grease reduces the friction that is critical to proper seat post grip. Remove any grease from the surfaces of the seat tube and seat post. WARRANTY For the complete warranty provisions and any additional information, please refer to the Specialized Owner’s Manual or TECH TIP: Specialized recommends the application of carbon assembly compound between the seat tube and post to increase friction. Recommended compounds can be found at See your authorized Specialized retailer if you have any questions. SPECIALIZED BICYCLE COMPONENTS 15130 Concord Circl...
Эта инструкция также подходит к моделям:Велосипеды - Ruby (127.34 kb)