Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Click ‘Next’ to continue. > The ‘Installation’ screen appears. The items that can be installed are shown on the left side of the screen. An explanation of each item is given on the right side. All items are already selected for installation. 5 Click the 'Next' button if you wish to install all items. Or: If there are certain items you do not wish to install, check the boxes before these items. Select at least ‘SPC220NC WebCam Driver’ and ‘WebCam Video Viewer’ for SPC220NC WebCam as well as for SPC225NC WebCam (software is the same for both WebCams). Click the 'Next' button. > The following software license agreement appears. 6 Click on 'Yes' to continue the installation. > The following screen appears when the installation was successful. 7 Select the user manual. Or: Click 'Next' to continue. > The ’Reboot’ screen appears. 8 Select ‘Yes’ to restart your PC / laptop, then click ‘Finish’. > The WebCam Video Viewer desktop shortcut will be installed after installation. > Via the WebCam Video Viewer you have access to all camera- related software. See ‘Operating the WebCam’. 9 You can now connect your WebCam. EN Installation Connecting the WebCam to your PC / laptop General 1 Be sure to run the installation CD first, before connecting the WebCam to the PC / laptop. 2 Turn on the PC / laptop. 3 Connect the USB connector of the USB cable to the USB port of the PC / laptop. > The WebCam will now derive its power from the PC / laptop. 4 Aim the webcam as required. 5 Push the USB cable into the cable management slot. 6 Use the clamp and the two rubber rims to attach the WebCam to your PC monitor or laptop screen. SPC220NC WebCam 7 3 3 5 6 6 8 5 7 Peel off the protective foil on the rear of the microphone (SPC220NC only) and attach the microphone to the PC monitor or laptop screen. 8 Connect the microphone plug to the microphone or green socket of the sound card. SPC225NC WebCam 7 Connect the headset audio cable (SPC225NC only) to the sound card of your PC / laptop. • Connect the grey headphone plug (n) to the headphone socket of the PC sound card. • Connect the white microphone plug ( ) to the microphone or green socket of the sound card. • If desired, attach the foam pads to the earphones for more listening comfort. • If desired, click the audio cable into the shirt clip and attach the clip to your shirt. Installation EN 11 AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN 3 3 6 6 7 7 5 5 EN WebCam settings The Philips SPC220NC/SPC225NC video proper ties can be changed: -from within an application; -by clicking the WebCam Video Viewer icon in the Windows taskbar, bottom right of your screen, or -by selecting ‘Advance’ in the WebCam Video Viewer. See ‘Operating the WebCam. Most applications can show a 'live preview' video image on your monitor. Always use this option to see the effect of changed settings on your screen. General settings 12 1 Flickerless The Flickerless option should only be used under flickering light conditions (e.g. fluorescent or neon lamps) to prevent flickering or strangely colored video images. If this option is used under normal lighting conditions the video image may be overexposed. 2 Region If you are using the Philips SPC220NC/SPC225NC in Europe, select '50 Hz' and if you are using the Philips SPC220NC/ SPC225NC in Nor th America, select '60 Hz'. For Asia this setting is dependent on the local mains output. E.g. for China, select ‘50 Hz’ and for Taiwan, select ‘60 Hz’. For Japan the setting is region dependent. Please check your local mains output to find the correct ‘Region’ setting. WebCam settings EN Picture settings 87654 3 9 0 ! @ # $% ^ 3 Full automatic control: on/off This full automatic control mode provides a ver y easy way to get the best out of your Philips SPC220NC/SPC225NC WebCam. Or you can choose to have maximum manual control over the WebCam settings by switching the full automatic control mode off. Full automatic control 'on' is the preferred setting for normal use. Techniques active within full automatic control mode are: – Automatic exposure control and automatic white balance control, to provide the best video source signal possible; – Automatic frame rate selection for improved WebCam sensitivity in low light conditions. 4 Frame rate You can use the scroll open menu to set the frame rate of the video you wish to capture. E.g. 30 fps means that the WebCam will capture video at 30 frames per second. EN WebCam settings 5 6 7 8 9 0 Auto Exposure & Exposure slider The exposure is the amount of light received by the sensor and is determined by how long the sensor is exposed to capture a snapshot or video frame. The result depends on the sensitivity of the sensor. The WebCam will find the optimal setting if you select the automatic exposure option. You can use the exposure slider if you would like to set the WebCam according to your personal preferences. Reset Press this button if you would like to reset the WebCam settings to the default factor y settings. Save Press this button if you...
Эта инструкция также подходит к моделям:Вебкамеры - SPC220NC/00 (3.78 mb)