Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
10 Frying programs These programmes should only be used with pans recommended for the frying function. The following food can be prepared using these programmes: Programme Dish .‚ Escalope .. Breast meat (poultry), cordon bleu .„ Rare steak .… Medium or well-cooked steak .† Fish .‡ Pan-fried frozen vegetables and other ingredients .. Oven-style - potato chips (frozen) .‰ Pancakes .S Omelette, eggs Select the desired program Select the hotplate: 1. Press the . symbol. The .‹ indicator lights up on the hotplate display. 2. In the next 10 seconds, select the required program using symbols 1 to 9. The program is now selected. The temperature symbol stays lit until the set temperature is reached. Once reached, the signal sounds and the temperature symbol light goes out. Add oil or butter to the pan and then the food. As usual, turn the food over to avoid burning. Switching off the program Press the . symbol. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Turning on and off the childproof lock. The hob should be switched off. To turn on: press and hold the >D symbol for approx. 4 seconds. The D symbol lights up for 4 seconds. The hob is locked. To turn off: press and hold the >D symbol for approx. 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Restrictions when using This function is available on all hotplates, provided that no other hotplate in the same group is operating, (see diagram). Otherwise, the › and S symbols will flash on the display of the selected hotplate; then the power level S is automatically set. ........................ ............ How to activate 1. Select a hotplate. 2. Press the boost G symbol. The function has been turned on. To deactivate 1. Select a hotplate. 2. Press the boost G symbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically Enter the time period for the hotplate. The hotplate turns off automatically once the time has elapsed. How to program 1. Select the required hotplate and power level. 2. Press the 0 symbol twice. ‹‹ y __ light up on the time function program display. 3. In the next 10 seconds, program the required time using symbols 1 to 9. ........ The cooking time starts to count. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Changing or cancelling the time Select the hotplate and press the 0 symbol twice. The __ and r displays appear Change the cooking time using symbols 1 to 9 or press 0 to cancel the time. Notes ¦ If a cooking time has been programmed, the display always shows the time of this function. To check the cooking time remaining in a hotplate, select a hotplate and press the 0 symbol twice. ¦ If a time has been programmed for several hotplates, the time of the selected hotplate is always shown. ¦ Any cooking time can be programmed for up to 99 minutes. Automatically switch off a hotplate with the deep-frying function When cooking using the deep-frying function, the programmed cooking time begins to count down once the selected zone reaches the desired temperature. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep is heard and ‹.‹ appears in the hotplate and the time programming function display shows ‹‹ for 10 seconds. When the 0 symbol is pressed, the displays turn off and the beep goes off. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up in the time program function display. 2. Set the required time using symbols 1 to 9. The time starts again after a few seconds. Once the time has elapsed Once the time has elapsed, a beep will sound. ‹‹ and Uare displayed in the time program function display. After pressing the 0 symbol, the indications turn off. Changing or cancelling the time Press the 0 symbol, the U indicator lights up. Change the time using the 1 to 9 symbols or press 0 to cancel. Cleaning lock function Cleaning the control panel while the hob is on may change the lo...
Эта инструкция также подходит к моделям:Варочные панели - PIM875N24E/21 (532.9 kb)