Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Warnings When using cookware of a different size or made of a different material, noise and vibrations that do not affect the correct working of the zone may occur. To obtain maximum power with the Powerboost Function, place the cookware in the centre of the flexible zone when used as a single hotplate. On hobs with more than one flexible zone, it is not recommended to use several zones at the same time for a single pan. Consisting of two independent zones The flexible zone can be used normally as two independent hotplates. How to activate See “ adjusting the hotplate“ section. As one hotplate To use the entire hotplate with all individual zones. How to activate The hob must be switched on. 1. Place the cookware and press the . symbol. The N. indicator lights up. The flexible zone has been activated. 2. Then select the desired power level by sliding your finger over the programming zone until the desired power level lights up. The flexible zone is switched on. Changing the power level Select the flexible zone by pressing the . symbol and change the power level in the programming zone. Adding more cookware Press the .symbol. The new pan will be detected and the previously selected power level will be maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be maintained. To deactivate Set it to ‹ in the programming zone. Return to using as two hotplates Select one of the hotplates in the flexible zone. Note: When a hob is switched off and later switched on again, the flexible zone will again be used as two hotplates. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. Activating and deactivating the childprooflock. The range must be turned off. To activate: press and hold the # symbol for approx. 4 seconds. The @ symbol lights up for 10 seconds. The range is locked. To deactivate: press and hold the # symbol for approx. 4 seconds. The lock is now deactivated. Childproof lock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating All of the relevant information on the automatic childproof lock connection can be found in the Basic settings chapter. Powerboost function The Powerboost function can be used to heat large amounts of water more quickly than the power level S. Restrictions when using This function is available on all hotplates, provided that no other zone in the same group is working ( see diagram). Otherwise, the › and S symbols will flash on the selected hotplate display; then the power level S will be automatically set. On hotplate number 3, the Powerboost function can be activated at any time. . . Note: The Powerboost function can be activated in the flexible zone when used as a single hotplate. In this case, place the pan in the centre as shown in the Flexible zone section. To activate 1. Select the power level S. 2. Press the programming panel located above the @ › symbol. The function has been activated. To turn off Press the programming panel located above the @ › symbol. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: 3. Within the next 10 seconds, select the desired cooking time in the programming zone. The possible default setting is, ¦ to automatically switch off a hotplate. from left to right: 1, 2, 3, etc. , up to 10 minutes. ¦ as a timer. Turning off a hotplate automatically The zone turns off automatically once the selected time has elapsed. Program the cooking time. The hob must be switched on: 1. Select the desired hotplate and power level. 2. Press the 0 symbol. The x indicator on the hotplate lights up. ‹ ‹ is displayed on the time program function display. To select another hotplate, press the 0 symbol several times until the x indicator for the desired hotplate lights up. After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming panel, the cooking time is reduced by one minute, if it is held down the time is automatically reduced to one minute. If the previous setting from 6 to 10 is pressed in the programming panel , the cooking time is increased by one minute, if it is held down the time is automatically increased to 99 minutes. Changing or cancelling the time Press the 0 symbol several times until the required x indicator lights up. Change the cooking time in the progra...