Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
3. Select the required cooking time in the programming panel. The possible previous setting is, from left to right 1,2, 3, etc. , up to 10 minutes. Within the next 10 seconds, continue past the options in the programming panel until reaching the desired time. After a few seconds the cooking time begins to count down. Automatic programming If the previous setting from 1 to 5 is pressed in the programming panel, the cooking time is reduced by one minute, if it is held down the time is automatically reduced to one minute. If the previous setting from 6 to10 is pressed in the programming panel , the cooking time is increased by one minute, if it is held down the time is automatically increased to 99 minutes. Once the time has elapsed The hotplate switches off. An audible signal sounds and ‹ ‹ appears in the time program function display for 10 seconds. Thex indicator lights up. Pressing the 0 symbol turns off the indicators and stops the signal. Changing or cancelling the time Press the 0 symbol several times until the required x indicator lights up. Change the cooking time in the programming panel, or set to ‹‹ . Notes ¦ If a cooking time has been programmed in several zones, it can be set to display all time values. To do this, press the 0 symbol several times until the x indicator for the required hotplate lights up. ¦ Cooking times of up to 99 minutes can be programmed. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled "Basic settings" . Note: The cooking time of a zone may be cancelled or changed: Press the 0 symbol several times until the required x indicator lights up. Change the cooking time in the programming panel, or set to ‹‹ . The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Once the time has elapsed A warning beep sounds. In the time program function display ‹‹ is shown, and the W indicator comes on. After 10 seconds the indicators turn off. Pressing the 0 symbol turns off the indicators and stops the beep. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the cooking time in the programming panel, or set to ‹‹ . Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time...
Эта инструкция также подходит к моделям:Варочные панели - EH645MB11M/02 (267.28 kb)
Варочные панели - EH645MB11M/20 (267.28 kb)
Варочные панели - EH675MB11E/01 (267.28 kb)
Варочные панели - EH675MB11E/02 (267.28 kb)