Войти:
Оценок - 3, средний балл: 5 ( )

Инструкция по эксплуатации Jenn-Air, модель VESBMR

Производитель: Jenn-Air
Размер: 460 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Unscrew the 6 screws from back of stove shown in Figure 8. Remove metal plate. AVOID STRESS TO THE WIRES. Figure 8 - Locating Flame Generation Cylinder Grounding Connecting Screw Screws Screws Screws 2. Locate the flame generation cylindrical drum. It is constructed of two removable halves; either of which can be removed from the unit. 2. Squeeze half of drum cylinder until it's top edge clears the top drum track. Remove bottom edge of cylinder drum from bottom drum track. This will give you access to the light bulbs. Note: Do not exert excessive pressure on drum cylinder as this may cause damage. 3. Remove spring clip. Hold socket and pull out old bulb. 4. Hold socket and push in new bulb (DO NOT exceed wattage). Replace spring clip. 5. Repeat steps 5 and 6 for second bulb. 6. Insert bottom edge of removed cylinder half into bottom drum track. Gently squeeze drum cylinder until it's top edge fits into top drum rack. 7. Replace the metal plate with screws. 8. Replace the log set ember bed. 9. Replacethemirror. Note:Beforereplacing,clean mirror of any dust or fingerprints. Make sure the mirror side is toward the front of the unit. 10. Replace the top contrasting light housing. Note: The contrasting light should be placed at the mid point of the mirror edge. 11. Replace the metal plate and 4 screws. Replace the top of the unit by sliding the top forward until the clips reconnect. 12. Secure the top to the back frame by reattaching screws. Flame Cylinder Drum Figure 9 - Flame Generation Cylinder Drum 117190-01B 7 CLEANING AND MAINTENANCE Continued CLEANING FRONT PANEL GLASS WARNING: When cleaning unit, the power supply should be disconnected and the unit should be cool. Over time the front glass panel may become dirty or dusty. Dust can be removed by lightly rubbing the glass surface with a clean, lint free cloth or paper towel. To remove fingerprints or other marks, use a damp cloth with a good quality household glass cleaner. The front glass panel should be completely dried with a clean, lint free cloth or paper towel. CAUTION: Do not use abrasive cleaners on glass panel. Do not spray liquids directly onto any surface of the unit. WARNING: An authorized service representative should perform any other servicing. STORAGE When not in use, unplug the unit from the power supply and store in dry, dust free location. TECHNICAL SERVICE You may have further questions about your electric stove. If so, contact DESA Heating Products. Technical Service Department at 1-866-672-6040. When calling please have your model and serial numbers of your heater ready. You can also visit DESAHeating Products.technical services web site at REPLACEMENT PARTS Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty. PARTS UNDER WARRANTY Contact authorized dealers of this product. If they can.t supply original replacement part(s), call DESA Heating Products. Technical Service Depar...

Эта инструкция также подходит к моделям:
Варочные панели - CGESBMR (460 kb)
Варочные панели - CGESBMR (460 kb)
Варочные панели - CGESBMR (460 kb)
Варочные панели - CGESBMR (460 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории