Connect the iron to the mains electricity supply Plug in the iron. The warning light goes on and indicates that the iron is heating up. As soon as the light goes out, the set temperature has been reached and the iron is ready for use. 4 ADJUSTABLE STEAM FUNCTION Set the variable steam control to required steam volume. Steam can only be produced when the thermostat is aligned to l l l or max. (red zone). Allow iron to heat up (light goes out) before activating the variable steam control. Anti-dri
“Precision Steam Jet” nozzle (depending on the model) 2. “Precision Steam Jet” button (depending on the model) 3. Humid steam button (depending on the model) 4. Steam control button 5. Temperature control dial for iron soleplate 6. Iron temperature control light 7. Steam generator boiler (in the base unit) 8. Cord fastener Control panel 9. Handles for removing and replacing the water tank 10. Removable water tank 11. Removable water tank filler cover 12. Iron rest 13. Boiler rinse plug (under bo
Steam Chamber Cleaning Function This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month. . Fill the iron with cold tap water halfway to the max line and set variable steam lever to min. . Stand on heel and plug in. . Set thermostat dial to maximum (lll ) position. . When the iron reaches the correct temperature, indicator light will go ou
• Use appliance for its intended use only. • This appliance is not designed to be used by people (including children) with a physical, sensory or mental impairment, or people without knowledgeor experience, unless they are supervised or given prior instructionsconcerning the use of the appliance by someone responsible for their safety. • Children must be supervised to ensure that they do not play with theappliance. • Do not leave appliance unattended while plugged in or while it is still hot. •
Use appliance only for its intended use. 2. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids. 3. The appliance should always be turned off before plugging or unplugging from outlet. Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4. Always disconnect appliance from electrical outlet when filling with water or emptying when not in use. 5. Do not allow cord to touch hot surfaces. Let iron cool completely b
2. Turn the unit to off (see section Turning On and Off) and unplug from outlet. 3. Slowly unscrew the boiler cap. Using a water pitcher, fill with 33 oz. of water. Do not fill water tank past the base of the boiler cap thread. Be sure that water does not spill over. If this occurs remove the excess water. 4. Replace the boiler cap and screw it on tightly. 5. Plug back in to electrical outlet. AFTER IRONING 1. Turn the unit off. (Consult section Turning On and Off.) 2. Unplug the appliance. 3. P
• To protect against a risk of electric shock, do not immerse the iron in water or other liquids. • The iron should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. • Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. • Always disconnect iron from electrical outlet when filling iron with water, emptying i
Set the temperature for the type of material to be ironed. Anti Calc System Minerals in water can build up in the steam chamber. The Anti Calc system contains a special resin that neutralizes the harmful minerals. This system is designed to extend and maintain the high steam performance of the iron. The cartridge is not replaceable. Note: Do not use descaling agents in your iron. Anti-Drip System In order to produce steam, all irons require a high temperature. If the soleplate is not hot enough
1 fig. 2 fig. 3 fig. 4 fig. 5 fig. 6 fig. 7 fig. 8 NO OK fig. 9 AUTO-OFF AUTO-OFF NO OK fig. 10 fig. 11 fig. 12 fig. 13 fig. 14 fig. 15 fig. 16 fig. 17 fig. 18 fig. 19 NO fig. 20 З праски витiкає вода. Занадто часте натискання кнопки парового удару. Робiть бiльшi iнтервали мiж натисканнями кнопки. Використовується дистильована/демiнералiзов ана або пом’якшена вода. Використовуйте тiльки необроблену воду з-пiд крана або наполовину розводьте воду з-пiд крана дистильованою/ демiнералiзованою водою.
Move the steam control to steam position after approx. 1 minute. Plug in the iron and allow the iron to heat up again. Wait until the remaining water has evaporated. Unplug from the mains and allow the iron to fully cool down. USE 4 • Filling the water tank IMPORTANT Before filling the water tank, unplug the iron and set the steam control to dry position . Tilt the iron. Open the filling inlet (fig.6). Pour in water up to the max mark (fig.7). Close the filler inlet (fig.8) and return the iron t