Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot ‘Max’ Setting Control knob Do not iron positions at all Fabric Silk, Nylon, Acetates e.g. Acrilan Courtelle, Orlon Wool, Polyester mixtures e.g. Polyester/Cotton Triacetates, e.g. Tricel/Polyester Cotton, Linen Rayon, Rayon mixtures, e.g. Rayon/Linen Ironing Iron on wrong side, if moisture required use damp cloth (Not Acetate) Fabrics requiring this setting usually require steam pressing for heavy cotton, denim etc. With water in tank Stea

During use, the no drip system may emit a loud click, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly. Emptying and Storing When you have finished ironing, unplug your iron. Ensure that the variable steam control is set at the “0” position, remove the fill cap and empty any remaining water out of the filling hole G. Do not store in the box, but in an upright position H, so that any drops of water remaining cannot

(UK and Ireland customers only) Turbosteam iron steam/spray/shot Please read and keep these instructions Getting the best from your new iron.... Safety first Caution must be used when handling this appliance as it does get very hot. Always switch off the unit and allow to cool before cleaning or storing. ! ! To improve the life of your new product and to ensure the cleanliness of your clothes, we strongly recommend the use of distilled or demineralised water. RN40514 MUK Rev 1 If you have a prob

Press the shot of steam button about 10 times in succession. After this cleaning operation, empty out any remaining water. WARNING: Do not attempt to descale the soleplate with descaling products. To clean a stainless steel soleplate (certain models only) To keep the soleplate of your iron clean and free of limescale, we recommend that you use one of the gentle chrome, silver or stainless steel cleaners that are generally available. Always follow the manufacturers instructions. To clean off melt

•WARNING: when not in use, your iron should never be placed flat and left on an ironing board. •To prevent damage to the textile being ironed, follow the temperature guide carefully. (Test the inside of the hem of the garment). • When ironing is complete, remove the plug from the socket, empty any remaining water from the tank, and allow to cool before storage. • If you drop or severely knock your iron this could cause internal damage even if the outside appears alright. Have it checked by a qua

It will be accompanied by a clicking noise which is quite normal. 8 Begin first time ironing with an old towel. It takes one minute to reach the required temperature. 9 Press the steam button for steam ironing. 10 To switch the unit off, turn the power switch on the base unit to ‘O’ (OFF). Dry ironing 1 Connect the appliance to a suitable mains outlet. 2 Turn the temperature dial on the iron in a clockwise direction, select dot-1, dot-2 or dot-3 according to the recommendation of the garment lab

See page 8 of this manual for more specific pressing tips. 7. Once pressing tasks are complete, immediately set On/Off Switch to “Off” (O) position and unplug grounded power cord from electrical outlet. Refer to page 9 of this manual for further information about cleaning and storage of Fabric Steam Press. 7 Top Innovations, Inc. USING THE FABRIC STEAM PRESS USING THE FABRIC STEAM PRESS STEAM BURST 1. Hold Pressing Plate approximately 75 mm. above Ironing Board. 2. Press Steam Burst Button to re

You must WAIT for the light to go ON and then OFF again before continuing to ensure the soleplate of the iron is not too hot. FOR MORE INFORMATION on the types of fabrics ironed in various settings please refer to the Fabric Chart on page 11. Because The SteamJet Station Iron produces a burst of steam greater than normal irons, it can be used vertically as well as horizontally. Clearing & Cleaning the Appliance To CLEAR the iron if clogged or prior to storing: STEP ONE Turn the Temperature Contr

Wrap cord around base of Hand Grip when storing. 20. Always allow Home & Away Steam Iron to cool completely (at least 30 minutes) before storing. Prop unit upright on Stand when cooling, to avoid heat damage to surfaces. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY B PRODUCT INFORMATION FEATURES 1. Ironing Plate 2. Main Body 3. Heating Indicator Light 4. Power Cord Clip 5. Water Tank Cap 6. Water Tank Windows (2) 7. Steam Button 8. Temperature Control Dial 9. Hand Grip 10. Water

Utilice la Prensa Compacta Digital de Vapor solamente para su proposito previsto segun lo indicado en este manual. 2. Ponga siempre la unidad en una superficie segura y llana cuando este en uso (mostrador, mesa de arriba, etc.). 3. No utilice un cordon de extension para funcionar esta unidad. 4. Antes de conectar el cable electrico en el enchufe electrico, asegurase de que toda la informacion electrica sobre esta etiqueta es del grado conveniente con la fuente de alimentacion. 5. Para reducir la