|
Фрагмент инструкции
Move the iron gently fromside to side to re-start it. The lamp will then flash once before it re-heats TDA 8.. sensixx comfort After Sales Service Great Britain BSH Appliance Care Grand Union House Old Wolverton Road Milton Keynes MK12 5ZR +44 (0)87 02-41 33 81 Operating instructions 009TDA8..GB/09/09 Before using the iron for the first time Before using the iron for the first time, any dirt inside must be cleaned out. 1. Remove the protective cover from the soleplate before using the iron. 2. While the iron in unplugged, fill the water tank (D) with tap water 3. Plug the appliance into the mains and set the temperature control (H) to the “•••” position. 4. When the iron has reached the correct temperature, set the steam regulator (A) to the maximum position. 5. Hold the iron horizontally and repeatedly press the shot of steam button (L). Any dirt should come out of the soleplate (E). It may smoke and smell – this is normal and will cease after a short while. 6. If necessary, carefully clean the soleplate down with a dry, folded cloth Cleaning and Maintenance Attention ! Risk of burns ! Self Cleaning The self clean function helps remove lime scale that has built up around the steam valve. This should be performed once every 3 or 4 uses. 1. When the iron is cold, slide the steam regulator (A) between the “0” and “2” positions in quick succession about 3 or 4 times to help loosen any lime scale and clean the valve inside. 2. Heat up the iron. Before starting ironing, hold the iron horizontally over a sink and press the jet of steam button (L) 3 or 4 times. This will help force out any lime scale and dirt deposits through the holes in the soleplate (E). For general cleaning, follow the information below: Problem Solution Dirty/lightly marked iron body or soleplate Clean body of iron or soleplate with a damp cloth then dry it. Mark develops on soleplate during use Set the iron to its maximum temperature setting. Rub the iron a few times over with a dry cotton cloth folded several times. Heavily stained soleplate While the iron is cold, iron a linen cloth soaked in white vinegar. Then dampen a cloth with water and wipe the soleplate clean and dry thoroughly. DO NOT de-scale or clean the water tank with cleaning products or solvents, as these could cause the iron to drip when using the steam function. DO NOT use a “professional steam cleaner” for cleaning the appliance. GUARANTEE TERMS The terms of the guarantee for this appliance are in accordance with that stated by our representative for the country in which it is sold. Details of those conditions can be obtained from the retailer from whom the appliance was purchased. The SALES RECEIPT must be presented when making any claims against the terms of this guarantee. We reserve the right to make technical modifications. Environmental Care This iron has been redesigned according to ecological criteria, related to the sustainable development, analyzing its whole lifecycle - from ma...
Эта инструкция также подходит к моделям:Утюги - TDA8313GB/02 (952.61 kb)
Утюги - TDA8313GB/03 (952.61 kb)
Утюги - TDA8313GB/04 (952.61 kb)
Утюги - TDA8313GB/05 (952.61 kb)