Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
In order to avoid that, under unfavourable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0.27 .. If necessary, the user can ask the public power supply company for the system impedance at the interface point. Keep the appliance out of children’s reach. This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children should be supervised to ensure that they do not play with the appliance. The appliance must be used and placed on a stable surface. When placed in a support, make sure that the surface on which the support stands is stable. The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water. It must be checked by an authorized Technical Service Centre before it can be used again. Remove the plug form the socket before filling the appliance with water or before pouring out the remaining water after use. Never immerse the iron in water or any other fluid. The appliance must never be placed under the tap to fill the water. Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.) The electrical plug must not be removed from the socket by pulling the cable. Unplug the appliance form the mains supply after each use, or if a fault is suspected. With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Service Centre. Unplug the iron from the mains supply when you have to leave the iron unattended. Before using your appliance for the first time Fill the tank of the iron with tap water and set the temperature control to “max” Plug in the appliance to the mains. When the steam iron has reached the desired temperature (pilot light goes out), let the water create steam by setting the steam control to “2” and by repeatedly pressing the button . When using the steam function for the first time, do not direct the steam towards the laundry, as there could still be contaminants in the steam dispenser. Using the appliance The pilot light illuminates while the iron is heating up. As soon as the selected temperature hasbeen reached, the light goes out. Do not use condensation water from tumble dryers, fridges or similar. lf the iron is already hot, you can continue ironing while the iron is heating up. Sort laundry according to the fabric care labels and start at the lowest temperature “•“. • Synthetics •• Silk – Wool ••• Cotton – Linen Filling the tank Fig. 1 Set steam control to “0“ and rernove the plug! Use only clean water from the tap without mixing anything with it. The addition of other liquids, such as perfume, will damage ...
Эта инструкция также подходит к моделям:Утюги - PV1462/03 (1.15 mb)
Утюги - TB23330/01 (1.15 mb)
Утюги - TB23330/02 (1.15 mb)
Утюги - TB23330/03 (1.15 mb)