Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today English s Before first use 1 Remove any sticker or protective foil from the soleplate. 2 Let the iron heat up to maximum temperature and pass the iron over a piece of damp cloth for several minutes to remove any residues from the soleplate. Preparing for use Filling the water tank Do not put perfume, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other chemicals in the water tank. Never immerse the iron in water. 1 Switch off the appliance and unplug it. 2 Set the steam control to position 0 (= no steam). 3 Open the cap of the filling opening. 4 Tilt the iron backwards. 5 Fill the water tank with tap water up to the maximum level with the filling cup. Do not fill the tank beyond the MAX indication. Note: If the tap water in your area is very hard, we advise you to use distilled water. 6 Close the cap of the filling opening (‘click'). Setting the temperature 1 Put the iron on its heel. 2 To set the required ironing temperature, turn the temperature dial to the appropriate position. Check the laundry care label for the required ironing temperature: - • Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester) - • Silk - 2 Wool - ••• Cotton, linen If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that is not visible when you wear or use the article. Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. Avoid using the spray function to prevent stains. Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibres. 3 Put the mains plug in an earthed wall socket. 6 ENGLISH 4 When the temperature light goes out, wait a while before you start ironing. During ironing, the temperature light goes on from time to time. This indicates that the iron is heating up to the set temperature. w / p 0 | 2 3 1# r Using the appliance Note: The iron may give off some smoke when you use it for the first time. This stops after a short while. Steam ironing 1 Make sure that there is enough water in the water tank. 2 Set the recommended ironing temperature (see chapter ‘Preparing for use', section ‘Setting the temperature'). 3 Set the appropriate steam setting. Make sure that the steam set...
Эта инструкция также подходит к моделям:Утюги - Elance 3100 GC3135 (3.12 mb)
Утюги - Elance 3100 GC3106 (3.12 mb)
Утюги - Elance 3100 GC3110 (3.12 mb)
Утюги - Elance 3100 GC3111 (3.12 mb)