Войти:
Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации Hamilton Beach, модель 840091300

Производитель: Hamilton Beach
Размер: 336.65 kb
Название файла: 11950eaa-53b5-46b5-8d59-bec6f4c1b9da.pdf
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


Water Fill Cover 5. Spray Nozzle 6. Water Window 7. Temperature Control Dial 8. Soleplate 9. Heel Rest 10. Power Light 11. Cord * Features on selected models. Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. Press the Blast button several times. This will clean the vents. Then follow the Self-Clean instructions (see page 6) beginning with Step 3. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. 3 840091300 ENv01 9/24/01 4:32 PM Page 4 Using Your Iron To Dry Iron 1. Plug iron into outlet. desired temp2. Set the Adjustable Steam Knob erature. Allow to ( Dry Iron). two minutes for iron to reach desired temperature. 4. To turn iron Off, turn Temperature Control Dial to Off and unplug iron. To Steam Iron 3. Turn Temperature Control Dial to 1. Unplug iron. Turn Adjustable Steam Knob to (Dry Iron). Place iron soleplate on flat surface. Open water fill cover. 2. Using a cup, slowly pour 6 ounces of tap water into water tank opening. Do not fill iron directly from the faucet. 3. Plug iron into outlet. Set iron upright on heel rest. 4. Turn the Temperature Control Dial to desired fabric setting in the steam range. 5. Allow two minutes for the iron to reach desired temperature. 6. Set Adjustable Steam Knob to the recommended steam level. See the “Fabric Setting Chart.” 7. To turn iron off, set Adjustable Steam Knob to (Dry Iron). Turn the Temperature Control Dial to Off. Unplug iron. 8. Empty water from the iron following directions in “Caring for Your Iron.” Water Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. 4 840091300 ENv01 9/24/01 4:32 PM Page 5 To Vertical Steam 1. Unplug iron. Turn Adjustable Steam Knob to (Dry Iron). Place iron soleplate on flat surface. Open water fill cover. 2. Using a cup, slowly pour 6 ounces of tap water into water tank opening. Do not fill iron directly from the faucet. 3. Plug iron into outlet. Set iron upright on heel rest. 4. Turn the Temperature Control Dial to the highest setting. 5. Allow two minutes for the iron to reach desired temperature. Fabric Setting Chart 6. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror. 7. Hold iron about 6 inches away from garment and press and release the Blast Button to steam out wrinkles. Do not press Blast Button more than once every 2 seconds. 8. To turn iron off, turn Temperature Control Dial to Off. Unplug iron. 9. Empty water from the iron following directions in “Caring for Your Iron.” NOTE: Do not allow hot soleplate to touch delicate garments. Steam Setting Temperature Setting Ironing Instructions Dry IronOff Nylon, Acrylic Dry iron using spray if necessary. Silk Dry iron on the inside of the garment. Steam RangeWool Use a press cloth and steam iron on the inside of garment. Polyester Iron while fabric is still damp. Rayon Iron using spray if necessary. Cotton, Linen For cotton, iron while still damp or use spray. For linen, iron fabric on the inside of the garment. Use this setting for vertical steaming. 5 840091300 ENv01 9/24/01 4:33 PM Page 6 Optional Features (on selected models) Adjustable Steam Knob This knob provides minimum steam for wool or maximum steam for linen. Set the knob to to change to Dry Iron. Spray and Blast of Steam Buttons Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Blast Spray Auto Shutoff Reset Button/Light The light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push the Reset Button/ Light to turn the iron back on. Power Light This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off. Power Light Self-Clean To keep the steam vents clear of any build-up, follow these instructions after each time you use the iron using steam. 1. Fill iron with water. Plug in iron. 2. Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes. 3. Turn Temperature Control Dial to Off. Unplug iron and hold over a sink with the soleplate facing down. 4. Turn Adjustable Steam Knob to (Self-Clean). Hot water and steam will flow out of steam vents. 5. Allow all water to drain from iron, then let cool and store. 6 840091300 ENv01 9/24/01 4:33 PM Page 7 Caring for Your Iron Iron 1. The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to Off. Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening. 2. After iron has completely cooled, wrap cord loosely ar...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории