Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
• The ready light will begin to flash whenever the temperature of the iron starts to decrease. If the temperature continues to decrease, the light will eventually turn off. When this occurs, place the iron back on the cradle for reheating. • The iron will be ready to use once the ready light illuminates. • The most efficient ironing performance will be obtained when the iron is reheated briefly each time the iron is placed on the cradle while adjusting a garment during normal ironing. • When returning the iron to its cradle, never place it in a sideways or backwards position. The contact points will become deformed and the iron will not be able to heat properly. • Steam may occasionally continue to discharge for a short time after the iron has been placed back on the cradle. This is normal. Place correctly Cuff Press When used as a “dry” iron, the removal of the water tank allows the iron to be used for pressing hard to reach areas such as sleeves, cuffs and childrens clothes. USING STEAM FEATURES Steam • Choose a setting within the steam range on the temperature control. • Steam will help remove stubborn wrinkles on wool, cotton and linen fabrics. •To iron velvet, use steam but do not let the iron touch the fabric. Burst of Steam Be sure that the iron is operated using the “linen /cotton” setting. • Press the Burst of Steam button at intervals of 2 - 5 seconds to apply powerful shots of steam directly onto wrinkles. • If the burst of steam button is pressed at shorter intervals, hot water droplets may be discharged. • If shots of steam are not discharged during initial usage, press the burst of steam button several times. • NEVER iron clothes while being worn. • DO NOT use the burst of steam feature with delicate fabrics. Steam • Choose a setting within the steam range on the temperature control. • Steam will help remove stubborn wrinkles on wool, cotton and linen fabrics. •To iron velvet, use steam but do not let the iron touch the fabric. Burst of Steam Be sure that the iron is operated using the “linen /cotton” setting. • Press the Burst of Steam button at intervals of 2 - 5 seconds to apply powerful shots of steam directly onto wrinkles. • If the burst of steam button is pressed at shorter intervals, hot water droplets may be discharged. • If shots of steam are not discharged during initial usage, press the burst of steam button several times. • NEVER iron clothes while being worn. • DO NOT use the burst of steam feature with delicate fabrics. •In the event that the steam/bursts of steam are not easily discharged due to insufficient water within the tank, refill the tank with water up to the mark indicating “FULL”. (.Refer to page 5.) • If the bursts of steam decrease during usage, place the iron back on the cradle for reheating. (If the burst of steam button has been operated more than 10 times consecutively, hot water droplets may be discharged.) • Do not place the iron on its side or upside down. This may cause water leakage and may result in burns due to the escape of hot water. USING THE SPRAY FUNCTION • The spray button can be utilized with either the “Dry” or the “Steam” functions. •The spray button should be pressed only while the iron is kept level. • If the spray does not discharge upon initial usage, then press the spray button several times. • The spray function helps to smooth cotton and linen fabrics, as well as stubborn wrinkles on other fabrics. • Some fabrics may stain if sprayed with water, so consult the garment care label carefully. • When storing the iron after using the spray function, press the spray button several times after the water has been drained from the tank, to be sure that all water is completely removed from within the spray unit. AFTER USE / STORAGE 1. Press the steam button, so that it returns to the “Dry” position. 2. Set the temperature control to “OFF”. 3. Remove the tank and drain any remaining water. After draining the water, reinstall the tank onto the iron. 4. Remove the electrical plug from the electrical outlet. • Grasp the electrical cord by the plug when unplugging it. 5. Retract the electrical cord. •To retract the electrical cord, pull it out slightly, then release it. • If the cord stops before retracting completely, pull out the cord slightly, straighten out any twisted parts, then slowly release it again. 6. Place the case back over the iron. • Be sure that both case latches are closed securely prior to storage. • Please be aware that the case will only fit correctly in one direction. If the case is placed sideways over the iron, it may become deformed due to the iron’s heat. AFTER USE / STORAGE 1. Press the steam button, so that it returns to the “Dry” position. 2. Set the temperature control to “OFF”. 3. Remove the tank and drain any remaining water. After draining the water, reinstall the tank onto the iron. 4. Remove the electrical plug from the electrical outlet. • Grasp the electrical cord by the plug when unplugging it. 5. Retract the electric...
Эта инструкция также подходит к моделям:Утюги - MLI7500AAW (1.73 mb)
Утюги - MLI7500AAW (1.73 mb)
Утюги - MLI7500AAW (1.73 mb)
Утюги - MLI7500AAW (1.73 mb)