Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP StoreEver MSL6480 Tape
CAUTION:
Parts can be damaged by
Library Chassis Fan Assembly
electrostatic discharge. Keep parts in
electrostatic containers until needed. Ensure you
Replacement
are properly grounded when touching static
sensitive components.
Abstract
The chassis fan assembly is a mandatory customer self repair
Identifying the failed component
part. HP customer self repair (CSR) programs allow you to
repair your StoreEver product. If a CSR part needs
Using the OCP (operator control panel) or RMI (remote
replacing, HP ships the part directly to you so that you can
management interface):
install it at your convenience. For more information about
CSR, contact your local service provider. For North America,
1.
Activate the UID (Unit Identification) LEDs from
see the CSR website: www.hp.com/go/selfrepair
the Maintenance→UID LED Control screen. This
will illuminate the blue LED on the front and rear
of the base module to identify the library
containing the failed component.
2.
Identify the module within the library that contains
the failed component:
a.
In the upper left corner of the Home screen,
locate the module that indicates an error.
b.
Click or tap the module for information on
the failed component.
Removing the chassis fan assembly
1.
Loosen the two blue captive thumbscrews on the
chassis fan assembly.
2.
Using the thumbscrews, slowly remove the chassis
fan assembly from the library.
1
© Copyright 2013 Hewlett-Packard Development Company, L.P.
2
HP Part Number: QU625-96306
Published: June 2013
Edition: 1
*QU625-96306*
Page 1
...