Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP StorageWorks Director 2/64

Производитель: HP
Размер: 176.64 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Supported Configurations

Acrobat
— RP505ENU.EXE – (Windows installation file for Acrobat Reader 5.0 with
Search)
Supported Configurations
Operation of multiple switches in a fabric topology is subject to the following
topology limits. Consider the impact of these limits when planning the fabric.
NOTE: For more information about planning the fabric, refer to hp StorageWorks SAN high
availability planning guide.


Fabric Elements—Each fabric element is defined by a unique domain ID that
ranges between 1 and 31; therefore, the theoretical limit of interconnected
directors in a single fabric is 31. The supported limit of interconnected switches in
a single fabric is 24. Because this number is subject to change, contact your
HP authorized service representative for the current number of interconnected
switches supported in a single fabric.

Inhomogeneous fabric—To determine if interoperability is supported for a
product, or if restrictions apply, refer to the product publications, or contact your
HP authorized service representative.

Number of Interswitch Links (ISLs)—Theoretically, the ISL limit per
Director 2/64 is 32 and for Director 2/140 is 70. The maximum supported number
of ISLs per director is half of the director ports. For redundancy, at least two ISLs
should connect any two director-class fabric elements. Because this number is
subject to change, contact your HP authorized service representative for the
current number of ISLs supported per director.

Hop Count—The fibre channel theoretical limit of ISL connections traversed (hop
count) in a single path through a fabric is 7. The maximum supported hop count in
a single path through a fabric is 3. Because this number is subject to change,
contact your HP authorized service representative for the current hop count
supported by a single fabric path.
NOTE: The hop count is equal to the number of ISL connections traversed in a single path,
not the total number of ISL connections between devices.
6
director release notes


...

Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StorageWorks Director 2/64 base 32 port config (176.64 kb)
Устройства обработки данных - HP StorageWorks Director 2/140 (176.64 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории