Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации HP, модель Disk System 2300 Deskside Disk Integration

Производитель: HP
Размер: 1.73 mb
Название файла:

Язык инструкции:enesfr

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


Document Outline

  • HP Storage Works Disk System 2300
    • Contents
    • Figures
    • Tables
  • Product Description
    • General Description
    • Features
      • Status Indicators
      • Power/Standby Switch
      • High Availability
      • Clustering (NT)
      • Upgradability
      • Environmental Services
      • Hardware Event Monitoring
    • Components
      • Disk Modules and Disk Module Filler Panels
      • BCCs and BCC Filler Panels
      • Power Supply/Fan Module
    • Hardware/Software Requirements
    • Topologies
    • Definitions
      • High availability (HA)
      • Hot-pluggable
      • JBOD
      • LVD
      • PDU and PDRU
      • Ultra160 SCSI
  • Installation
    • Preparation
      • Electrical Requirements
        • Choosing PDUs
        • Installing PDUs
      • Software Requirements
      • Auto-Termination
    • Step 1: Gather Tools
    • Step 2: Unpack the Product
    • Step 3: Install the device
      • Installing the Storage Device into a Rack System/E
      • Installing the storage device into an HP Computer Cabinet
      • Installing the Storage Device into a Rittal-Style Rack
      • Install the Disk System
    • Step 4: Install BCCs
    • Step 5: Set DIP Switches
    • Step 6: Connect SCSI and Power Cables
    • Step 7: Install Disk Modules
    • Step 8: Turn on the Disk System
    • Step 9: Verify Devices on the Host
      • Sample IOSCAN
      • Where do you go from here?
  • Configuration
    • Viewing a Disk System in IOSCAN
      • Sample IOSCAN
    • Setting DIP Switches
      • Rationale
    • Disk Addressing
      • Disk Slots and Addressing
    • Setting Up the Hardware Event Monitor
    • Aliasing Devices (HP-Qualified Only)
    • Updating Firmware (HP-Qualified Only)
    • Command View SDM
      • Supported Operating Systems
      • Installing CommandView SDM
    • HP TopTools
      • Supported Operating Systems
      • Installing HP TopTools 5.0
  • Troubleshooting
    • Overview
    • Event Notification (HP-UX Systems)
      • HP Command View SDM
      • TopTools
    • Status LEDs
    • Isolating Faults
  • Removal and Replacement
    • Disk Module
      • Preparation (HP-UX 11.XX)
        • To Determine If a Volume Group or Physical Volume Group Is
        • Active
        • To Determine If the Physical Volume Is Attached
        • To Replace Attached Physical Volumes
        • To Replace Unattached Physical Volumes
        • NT
      • Windows 2000
      • Tools
      • Procedure
    • BCC
      • Tools
      • Procedure
    • BCC Filler Panel
    • Power Supply
      • Tools
      • Procedure
    • Disk System
      • Tools
      • Procedure
    • Top Cover (HP-Qualified Only)
      • Tools
      • Procedure
    • Midplane (HP-Qualified Only)
      • Tools
      • Procedure
    • Deskside Base/External Covers (HP-Qualified Only)
      • Powering Down the Disk System
      • Removing the deskside base and external covers from the disk system
      • Tools
      • Procedure
    • Reinstalling the deskside base and external covers on the disk
    • system.
  • Reference

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории