to 5:00 p.m. Monday through Friday (Mountain Standard Time) **Call or visit our Web site for Saturday hours** **For customers outside the U.S. or Canada, please contact the store for assistance.** COMPETITION SERIES XL POWER LIFT® BASKETBALL SYSTEM MODEL #71525 WARNING Failure to comply with any of the warnings in these instructions may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also result in property da

SQ. END CAP into the front end of the ADJUSTMENT TUBE ASSEMBLY. 3. THE CONNECTOR PLATE IS NOT REQUIRED FOR THIS ASSEMBLY PLEASE DISCARD. 4. Assemble the ADJUSTMENT TUBE ASSEMBLY to the SEAT SUPPORT and BASE as shown on drawing, using two (2) 1/2 X 3-1/2 IN. BOLTS, four (4) 1/2 IN. WASHERS, and two (2) 1/2 IN. NYLOCK NUTS. (NOTE: THE BRACKET ON THE ADJUSTMENT TUBE ASSEMBLY IS FLUSH TO THE TOP OF THE TUBE, PLEASE ASSEMBLE FLUSH SIDE UP) 5. Insert one (1)2 IN. SQ. END CAP into the front end of t

X 1 IN. BUSHING PULLEY........................(Cl 162-1 4-1/2 O.D. X 1 IN. BUSHING PULLEY........................(Cl 161-1 20 .. 6 .. 2 3 PBF058 SELECTORIZED LAT MACHINE ASSEMBLY INSTRUCTIONS IMPORTANT: THE BODYSMITH SELECTORIZED LAT MACHINE MUST BE ASSEMBLED ON A FLAT LEVEL SURFACE TO ASSURE ITS PROPER FUNCTION. • PARABODY, INC. STRONGLY RECOMMENDS THAT THIS PRODUCT BE ASSEMBLED BY TWO PERSONS TO AVOID POSSIBLE INJURY. *** IMPORTANT *** KEEP ALL LOOSE FRAME CONNECTIONS LOOSE UNTIL INS

07426-600 Auf 100% Altpapier!Abb. ahnlich RO DK P CZ PL I E NL F GB DA 150 cm B 85 cm C 226 cm 31 kg max. 110 kg C A B GB Assembly Instructions Before assembling or using this fitness product, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts. For Your Safety ! ATTENTION! The training device s

BOLT, one (1) 1/2 IN. WASHER, and one (1) 1/2 IN. LOW HEIGHT LOCK NUT. (NOTE: TIGHTEN SWIVEL SLEEVE ENOUGH THAT IT SWIVELS FREELY, YET IT DOESN'T WOBBLE) 10. Insert two (2) 1-3/4 IN. SQ. END CAPS into each end of the ADJUSTABLE SLIDE. 11. Insert the multiple hole end of the ADJUSTABLE SLIDE into the SWIVEL SLEEVE. (NOTE: BE SURE SWIVEL SLEEVE IS IN THE PROPER POSITION, SEE DRAWING) Attach the other end to the ADJUSTABLE SLIDE MOUNT on the BACK PAD, using one (1) 1/2 X 3 IN. BOLT, two (2) 1/2 I

¦ To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers. Handling the equipment ¦ Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. ¦ It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, pe

¦ Instruct persons using the equipment (in particular children) on possible sources of danger during exercising. ¦ Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health! ¦ Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machin

The correct sequence is given in capital letters. ¦ Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. ¦ Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags! ¦ The equipment m

07977-900 A 150cm B 170cm C 46cm 23 kg max. 130 kg 45 Min.A C B 2-3 4-5 6-7 8-9 10-11 12-13 14-15 16-17 18-19 20-21 P DK CZ PL I E NL F GB D Auf 100% Altpapier! Abb. ahnlich GB Handling the equipment ¦ Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. ¦ It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration

or your PAP~,.BOD. CustomerSer~’,i~e Representath,e at: 1-800-32g-97~4 093 BODYSiVfIT~ PROSYSTEM ASSEMBLY PARTS L~ST SORT AND COUNT ALL PARTS BEFORE BEGYNNING ASSEiV[BLY ~AP, D%VARE: I_TCLM NAME/DESCPJPTION QTY .~/8 X 3-//4 IN. BOLT 2 ............................................................................................................. 3/~, X 3 IN. BOLT 14 ................................................................................................................. 3. 3/8 X 2-3/4 IN. B